GTR Wall Panel Moulding is a slim primed profile used to build decorative panel patterns on interior walls. Supplied in 2.7m lengths and light, stable sections, it lets designers create wainscoting, picture-frame panelling and geometric feature walls without the cost of solid timber. The factory primed surface is smooth and sealed, so only a light sand and a topcoat are needed after installation. It is intended for interior designers, joinery workshops and retailers serving the home decoration market.

Panelled walls have moved from period properties into contemporary interiors, where simple applied mouldings create depth and rhythm on large flat surfaces. Because these profiles are thin and light, they can be bonded directly to plasterboard or wood panels, keeping installation fast and avoiding damage to the structure. Using a stable primed substrate means the panels stay flat and the paint finish remains even, which matters on feature walls that are lit by raking light.

• Light And Slim: Thin sections bond easily to walls and panels without adding significant weight or depth.
• Primed And Sealed: Factory priming on all faces lets painters work faster and achieve a uniform finish.
• Straight Profiles: Consistent machining produces level edges that create clean, square panel patterns.
• Flexible Design: Can be cut into picture frames, grid layouts or applied panelling to suit any scheme.
• Smooth Surface: Fine sanded face accepts water-based and oil-based paints without heavy build.
• Stable Substrate: Low movement reduces gaps and paint cracking after installation.

The profile is used for feature walls in living rooms and bedrooms, wainscoting in hallways and stairs, and decorative panelling in hotel lobbies and retail interiors. Designers also apply it to ceiling coffers and furniture fronts where a painted frame effect is wanted. Because it is lightweight, it can be added to existing walls during a refurbishment with minimal preparation or disruption.

Bundles are shrink-wrapped with a protective liner between profiles and stacked on export plywood pallets sized for standard containers. Edge protection prevents damage to the machined faces in transit. Each batch is checked for profile accuracy, priming uniformity and surface quality, and inspection records are kept so that any buyer query can be traced back to the production run.

Profiles can be customised in width, thickness and section to suit a specific panelling design, and new tooling can be made from a drawing or sample. Free samples are supplied so designers can test patterns before committing to volume. Several profiles can be combined in one container, and our team will confirm tooling lead times, quantities and packing arrangements in the order acknowledgement.