Bldc Motor Controller D3P 24V 130A For Electric Forklifts,Floor-Cleaning Vehicles
Product Description:
The D3P controller series are brushed DC motor controllers with higher specification than D2P and applies to larger battery powered industrial vehicles. It supports serial communication port only but has a counterpart that supports CAN communication protocols. With a highly programmable software, the product could applied to almost any low power DC motor controlling scenarios without much limitation.
Features:
Full Featured
- 5 x Input Switch, 2 x NPN Output, Voltage Throttle.
- Build-in regenerate break to recycle energy and charge to battery when motor stop working.
- Advanced motor control algorithm provides smooth starting on a ramp.
Safety & Reliability
- It has advanced MOSFET power section which enables smooth and seamless motor controlling performance.
- The sealing and heat dissipation technologies are unique and self-developed by DALA.
- Powerful Fault detection mechanisms are adopted such as the over/under voltage protection, overcurrent and overheat preventions etc.
- Follow industrial practices plus innovative design and technologies for short circuit protection, brake control interface with hardware watchdog.
Specifications
| Content | Parameters |
| Model | D3P |
| Nominal Input Voltage | 24 |
| 20s output Current Rating (A) | 130A |
| 2 Min output Current Rating (A) | 70A |
| 60 Min output Current Rating (A) | 45A |
| Communication | Serial |
| Operating Temperature | -30℃~55℃ |
| Storage Temperature | -40℃~85℃ |
| IP Rating | IP65 |
| Motor Type | Brushed DC Motor (Bi-Di) |
Applications

Dimensions
