* Interface provided for extension and braking system
* Low start up speed due to low cogging and resistive torque design.
* Gearless, direct drive, low RPM generator.
* High standard, quality components for use in harsh and extreme environments for wind turbines.
* High efficiency and Low mechanical resistance energy loss.
* Generator is designed using specially selected material and treated to resist corrosion and oxidation.
* Designed for reliable and long operational lifetime under long-term full output.
* Designed for 20-year operation life.
* Patent protected design.
v id="StyleTableProd">
| Model number | GL-PMG-15K Horizontal | GL-PMG-15K Vertical |
| Rated rotation speed(RPM) | 125 |
| Rated output power(kW) | 15 |
| Shaft bearing | High standard NSK 6220DDU (Front) NSK 6220DDU (Rear) |
| Weight(Kgs) | 375 | 363 |
| Rotor inertia (Kg. m 2 ) | 1.79 |
| Fasteners (nuts and bolts) | High standard Stainless Steel |
| Lamination stack | High specification cold-rolled Steel |
| Windings temperature rating | 180 degrees Celsius |
| Magnet material | NdFeB (Neodymium Iron Boron) |
| Magnets temperature | rating 150 degrees Celsius |
| Generator configuration | 3 Phase star connected AC output or rectifier DC output |
| Safety | Capable of withstand short term shorting of the windings for braking effect at rated rotation speed. Class 1 electrical safety rated for prevention of |
| Starting torque(NM) | < 15 |
| Phase resistance(ohms) | 1.1 |
Recified DC Current at Rated Output(A) | 28 |
| Requied Torque at Rated Power(NM) | 1284 |
| Output Wire Square Section(mm 2 ) | 10 |
| Output Wire Length(mm) | 200 | 700 |