PN072183P3 Schneider Electric Original Driver Board for Altivar VFD Drive Control PCB Replacement Spare Part
The Schneider Electric PN072183P3 is an original driver board (gate drive and control PCB) engineered as a factory service spare for Schneider Altivar variable frequency drives. Installed within the drive power section, this board interfaces between the main control unit and the IGBT power stage, executing PWM signal conditioning, gate drive signal amplification, current and voltage feedback acquisition, and hardware-level protection tripping.
Built with industrial-grade components, reinforced creepage and clearance isolation, and precision sensing circuits, the PN072183P3 delivers accurate switching timing, reliable desaturation detection, and consistent protection response under continuous heavy-duty operation.
Replacing a faulty driver board with a genuine Schneider Electric PN072183P3 resolves common drive failures including SCF/OCF fault trips, output phase imbalance, unstable motor torque, intermittent shutdown, and gate drive signal loss caused by damaged semiconductor components.
Product Specifications: Schneider Electric PN072183P3
| Parameter |
Specification |
| Brand |
Schneider Electric |
| Part Number |
PN072183P3 |
| Product Type |
Driver Board / Drive Control PCB |
| Application |
Schneider Altivar VFD Drives |
| Function |
Gate Drive / PWM Conditioning / Current & Voltage Feedback |
Product pictures

Related products
| PN072128P4 |
PN072130P905 |
| PN072135P903 |
PN072131P902 |
| PN072135P904 |
PN072413P4 |
| PN072183P1 |
PN072183P2 |
| PN072183P4 |
PN072184P1 |
| PN072184P2 |
PN072185P1 |
| PN072185P2 |
PN072186P1 |
| PN072187P1 |
PN072188P1 |
| PN072189P1 |
PN072190P1 |
| PN072130P906 |
PN072135P906 |
FAQ
Q1: What is the Schneider Electric PN072183P3?
A: It is an original driver board for Schneider Altivar VFD drives, handling gate drive signal amplification, PWM conditioning, and power stage protection monitoring.
Q2: What drive faults does the PN072183P3 fix?
A: It resolves SCF/OCF fault trips, output phase imbalance, unstable motor torque, and intermittent shutdowns caused by a damaged gate drive control board.
Q3: Is the Schneider PN072183P3 a genuine original part?
A: Yes. We supply authentic Schneider Electric driver boards, each factory tested for PWM waveform integrity, isolation withstand voltage, and protection trip accuracy before dispatch.