Original Fukuda FCP-2155 ECG EKG machine battery 8-HRAAFD 9.6V 1100mAh
Fukuda FCP-2155 ECG machine battery is an 8-HRAAFD 9.6V 1100mAh type. Specifically designed for the Foton FCP-2155 series ECG machines, this rechargeable medical device battery consists of eight AAA-specification Ni-MH cells connected in series. It is a core power component ensuring the device's mobile clinical use. This rechargeable battery has no memory effect, supports repeated charge and discharge cycles, and has a cycle life of approximately 500 cycles, meeting the core requirements of medical devices for battery stability and safety.
1. Mobile Outpatient Testing
With a battery, the device no longer needs a fixed power source. A full charge allows the Fukuda FCP-2155 ECG machine to complete 10-12 routine ECG records, suitable for high-frequency outpatient scenarios and improving testing flexibility.
2. Bedside Emergency Applications
The battery can output a stable 9.6V voltage to ensure stable parameter monitoring. The 1100mAh capacity supports 30 minutes of continuous monitoring, meeting the needs of rapid bedside diagnosis for emergencies such as myocardial infarction.
3. Outdoor Screening Adaptation
The lightweight battery design makes it easy to carry to community clinics, mobile medical examination vehicles, etc. It is compatible with vehicle chargers for recharging. A full charge can complete rapid screening for 20-25 people, adapting to mobile healthcare needs.
| Product name | ECG battery |
| Model | 8-HRAAFD |
| Voltage | 9.6V |
| Capacity | 1.1Ah |
| Energy | 97Wh |
| Number of battery cells | 8 |
| Charge time | 4-5 hours |
| Cycle life | ≥300 times |
| Storage lifespan | 2 years |
| Color | Blue |
| Size | 130mm×65mm×25mm |
| Weight | About 280g |
| Interface type | 4-pin reverse insertion jack |

Usage Precautions
1. Capacity Decay Management
The cycle life of NiMH batteries naturally decreases with increased usage frequency. When the battery life drops below 70% of its initial value on a single full charge, it is recommended to replace the battery to avoid power outages during monitoring.
2. Charging Procedures
Only use the original Fukuda charger. Using an incompatible charger may cause the battery to overcharge and swell, or even damage the device's power module.
3. Storage and Maintenance Requirements
If the battery has been idle for more than one month, it should be charged to 50%-60% and stored in a dry environment with a temperature of 10-30℃ and humidity <70%. Recharge the battery every 3 months to prevent cell aging and failure.