Fiber Optical Switch Fast Switching Time 1x128 Optical Switch With LCD Display
Product Overview
This 1x128 Optical Switch Rackmount features one input and 128 output optical fiber ports, designed to selectively transmit, redirect, or block optical power in fiber transmission lines. These bidirectional optical switches can be used in both 1x128 and 128x1 configurations, making them ideal for optical fiber communication networks and measuring instruments.
The front panel supports various connector types including FC/APC, FC/UPC, SC/APC, SC/UPC, LC/APC, LC/UPC, ST/APC, and ST/UPC. The 2RU 19" rackmount can accommodate 1x24, 1x32, 1x48, 1x64 configurations or customized optical switches.
Applications
- FITL (Fiber In The Loop)
- Maintaining System
- Optical Network Remote Monitoring
- Cable Monitoring
- Automatic Measurement
Key Features
- Configurable channel and time interval for automatic scanning
- LED display panel for visual monitoring and convenient operation
- SerialNet with high reliability and stability
- Transparent transmission signal with high stability and reliability
- RS232 Control and RJ45 Ethernet Remote Management
Technical Specifications
| Parameter |
Unit |
1x4 |
1x8 |
1x12 |
1x16 |
1x24 |
1x32 |
1x64 |
1x128 |
| Wavelength Range | nm | 1260~1650 or customized |
| Testing Wavelength | nm | 1310/1550 or customized |
| Insertion Loss (Max) | dB | ≤1.0 | ≤1.0 | ≤1.5 | ≤1.5 | ≤1.5 | ≤1.5 | ≤1.5 | ≤2.0 |
| Return Loss | dB | SM ≥ 50 |
| Crosstalk | dB | ≤-70 |
| PDL | dB | ≤0.05 |
| WDL | dB | ≤0.25 |
| TDL | dB | ≤0.20 |
| Repeatability | dB | ≤0.02 |
| Switching Time | ms | ≤10 (Adjacent Channel) |
| Optical Power | mW | ≤500 |
| Fiber Type | um | 9/125 |
| Connector | / | FC, SC, LC, ST, SMA or customized |
| Monitor Port | / | RJ45 & RS232 or customized |
| Working Power Supply | V | AC:220V (50/60Hz) or DC:36V~72V |
| Operating Temperature | ℃ | -10~+60 |
| Storage Temperature | ℃ | -40~+85 |
Rackmount Dimensions
- 1U: L483×W230×H44.5 (Up to 16 channel) - customization available
- 2U: L483×W230×H89 (Up to 36 channel) - customization available
- 2U: L483×W350×H89 (Up to 64 channel) - customization available
- 3U: L483×W350×H133.5 (Up to 128 channel) - customization available
- 4U: L483×W350×H178 (Up to 256 channel) - customization available
Front Panel Overview
- Power: Master switch of power supply
- RJ45: Communications network management interface
- RS-232: RS232 serial communication interface
- LCD: Device for direct information display
- ▲▼: Keys to move up and down
- Enter: Key to determine selection
- Esc: Key to cancel operation
- COM, 1~128: Fiber interfaces
Back Panel Overview
- AC 85~265V: Power cord interface
- ON/OFF: Master switch of power supply
Default Settings
- Address: 01
- RS-232: Baud rate: 9600; Data bits: 8 bit; Stop bit: 1 bit; Parity bit: NONE
- RJ45: IP: 192.168.1.100; PORT: 5000; TCP/IP: TCP Server and UDP (Fixed port: 18888)
Optical Route & Communication Protocol
- Communication protocol uses all uppercase characters
- Device executes one instruction at a time
- "<" serves as the start instruction
- ">" serves as the end instruction