25.4×67 mm Opening Pipeline Concrete Reinforcing Mesh

25.4×67 mm Opening Pipeline Concrete Reinforcing Mesh Description:

Offshore pipeline counterweight welded wire mesh, also known as concrete weight coated mesh, is a specialized welded wire mesh made from low carbon steel wires. The line wires are deeply crimped and then welded into a corrugated structure, allowing for easy application of concrete coating, after which the mesh can be embedded underwater or underground. This product is primarily used for reinforcing, weighting, and protecting subsea oil and gas pipelines. It effectively resists corrosion and pressure in marine environments, thereby extending pipeline lifespan.

25.4×67 mm Opening Pipeline Concrete Reinforcing Mesh Specification:

Normal Export Specifications Kinds:

Technical Standards for 25.4×67 mm Opening Pipeline Concrete Reinforcing Mesh:

1. Wire Mesh Structural Requirements
The wire mesh should be RSFM type or similar. The wire mesh is made of longitudinal and transverse wires welded together using resistance welding.
2. Reference Standards
Welding of the wire mesh must comply with ASTM A185 and the wire mesh must meet ASTM A82.
3. General Requirements for Wire Mesh
The wire should be made of low-carbon steel wire rod, and the surface of the wire mesh should be galvanized for corrosion protection.
4. Wire Diameter Requirements
The wire mesh diameter must be no less than 2.55 mm x 2.0 mm (longitudinal wire x transverse wire), and 25.4 mm x 67 mm (longitudinal wire x transverse wire).
(Note: The wire mesh manufacturer guarantees that the wire mesh provided will withstand pipes with a diameter of 813 mm, a minimum 4.2 mm 3LPE anti-corrosion coating, and a 110 mm thick concrete weight coating. Using three layers of wire mesh, the minimum ratio of the average circumferential cross-sectional area of the reinforcement to the concrete layer cross-sectional area is 0.5%. The minimum ratio of the longitudinal cross-sectional area of the reinforcement to the concrete layer cross-sectional area is 0.08%.)
5. Mechanical Properties of Steel Wire
The mechanical properties of steel wire must comply with the requirements of GB/T 343. Tensile strength of wire ≥ 485 N/mm², elongation ≥ 12%, testing method GB/T 228. Shear strength of wire mesh welds ≥ 241 N/mm², testing method GB/T 1499.3. 180° bends ≥ 4 times, testing method GB/T 238.

25.4×67 mm Opening Pipeline Concrete Reinforcing Mesh Features:

l High quality material wire

l Standard wire diameter and hole size

l Enough roll width and roll length

l High tensile strength

l Strong anti-corrosion, anti-rust

l Strong welded point

l High degree of flexibility

l Long service life

l Easy to install

l Cost savings

25.4×67 mm Opening Pipeline Concrete Reinforcing Mesh Applications:

• Offshore oil and gas pipelines

• Subsea and underwater pipelines

• Underground water supply / drainage pipelines

• Concrete weight coating reinforcement

• Coastal and marine engineering pipeline protection

Our Company Profile:

Hebei Reinforce Pipeline Mesh Co., Ltd is an enterprise focusing on deep-sea energy pipeline protection. It is located at No.6, Ruilian Industrial Zone B, Shuguang East Street, Xicheng Industrial Zone, Raoyang County, Hengshui City, Hebei Province. Our company takes the steel wire mesh for concrete weight coating of submarine oil and natural gas pipelines independently developed and produced as its core product. We also produce safety rope nets around platforms, steel gratings, and vibrating screens.