0 ~ 6MPa… 150MPa PPM-T232C Polyurethane Equipment Pressure Transmitter
Product Introduction:
The PPM-T232C flat film pressure transmitter is made of a special and sturdy stainless steel flush film with high performance intelligent operation compensation circuit. The all-stainless steel integrated structure ensures that the hard particle impact in the measured medium will not damage the sensor diaphragm. With anti-blocking, anti-particle impact, anti-vibration and other characteristics, it is suitable for high-temperature viscous and easy to block slurry, field, strong vibration, solid-liquid mixed fluid pressure measurement.
Applications :
Mud, coal slurry, pulp, crude oil, asphalt, etc., oil well measuring instruments
Environmental protection chemical coatings, polyurethane equipment, paint detection systems,
Food slurry and other solid-liquid mixtures etc.
Technical Parameters :
| Measured medium : | Non-corrosive gas and liquid to 17-4PH, 316L stainless steel | 
| Pressure Type : | Sealed Reference Pressure, Ventilator Pressure | 
| Measuring range: | 0 ~ 6MPa… 10MPa… 150MPa | 
| Power supply : | 24VDC (12-32VDC) | 
| Output signal : | 4-20mA, 1-5VDC, 0-5VDC, 0-10VDC selectable | 
| Mounting thread : | M20 × 1.5, G1 / 2, 1 / 2NPT | 
| Electrical interface : | Hirschmann connector, aerial plug, direct outlet | 
| Non-linear : | 0.2% FS | 
| Repeatability : | 0.2% FS | 
| Accuracy: | 0.2% FS, 0.5% FS optional | 
| Long-term stability : | 0.2% FS / year (typical value) | 
| Working environment temperature : | -20 ~ + 75 ℃ | 
| Working medium temperature : | -40 ~ + 85 ℃ | 
Definition of wiring:
| Hirschmann Connector | |||
| 2-wire system | 3-wire system | ||
       ![]()  |  			Power supply | 1 | 1 | 
| Negative power | 2 | 2 | |
| Signal positive | 一 | 3 | |
| Direct outgoing | |||
| 2-wire system | 3-wire system | ||
|  			 
 
 
  |  			Power supply | red | red | 
| Negative power | black | black | |
| Signal positive | 一 | green | |
Dimensions in mm :
