Description The relay coil drive voltage is 5V, and the input control level can also be within 5V. · Output drive capacity: 250VAC-10A, 125VAC-10A, 30VDC-10A, 28V DC-10A. · Easy to use, each output group has a simple 3-wire structure, and 6 output terminals are reserved. · The input is directly connected to the MCU IO port or digital circuit, and the input high-level
relay The device is closed, and the input low level relay is released. · Working voltage 5V, pull-in current about 70mA per
circuit, with relay status indication light. · Full chip components. Reasonable drive circuit design, using 8050 transistor to
drive the relay Electrical action. · There are fixed screw holes for easy installation, module size: 25.8*33.4*16.7mm. Test
Instruction The input and output of the module are electrically insulated. After the correct voltage is supplied, you only need to
Connecting a high level (such as a short circuit with VCC) to the input pin can make the relay pull in,If not connected or
connected to low level (such as short-circuit with GND), the relay will not operate.