CA-3169B 2.1 Channel Subwoofer Amplifier Board TPA3116D2 Audio Stereo Equalizer Amp 5.0 HIFI Power
Available Versions
- Without Bluetooth version
- With Bluetooth version
- Upgraded version - with Bluetooth version + USB input
Key Features
- DC-powered 12-24V power supply using TI's TPA3116D2 high-performance digital power amplifier chip
- Supports 100W (bass channel) + 50W (left channel) + 50W (right channel) three-channel output
- Bluetooth version supports Bluetooth 5.0 audio reception with external audio input interface
- Includes preamplifier, bass crossover processing with multiple adjustment controls
- Wide working voltage with energy-saving design (efficiency up to 90%)
- Compatible with switching power supplies, laptop power supplies, car power supplies, etc.
- Pre-soldered and tested finished board, ready for installation
- Subwoofer cut-off frequency: 26-160Hz
Technical Specifications
| Parameter |
Specification |
| Dimensions (L × W × H) |
101 × 100 × 25mm (excluding potentiometer and socket projection) |
| Operating Voltage Range |
DC 12-25V |
| Recommended Power Supply |
DC24V 4A |
| Current Requirements |
3-4A (12-18V) or 4-5A (19-24V) |
| Bluetooth Receiving Distance |
> 8 meters |
| Audio Input Sensitivity |
600-800mV |
| Frequency Response Range |
20Hz-20KHz |
| Speaker Impedance (L/R Channels) |
4-8 ohm |
| Speaker Impedance (Subwoofer) |
2-8 ohm |
Note: Output power depends on supply voltage/current, speaker impedance, and audio input level. Higher power supply voltage typically enables greater output power. Lower speaker impedance generally allows for easier power achievement.
Function Switch Instructions (Bluetooth Version Only)
- Plug in power - defaults to Bluetooth mode
- Bluetooth disconnected - long press switch to switch to audio input mode
- Bluetooth play status - short press switch to pause/play