Long Distance Concrete Pump Truck Wireless Remote Control F24-60
Specification for transmitter:
| Model | F24-60-TX-V-(E) |
| TX Size | About 21.5x10.7x9.6cm |
| TX Weight | About 1137g |
| Housing Materail | Glass fiber-reinforced nylon-6 |
| Protection Degree | IP65 |
| Temperature Rating | -35°C ~ +85°C |
| TX power Supply | Four 1.5 volts Batteries(AA Size) |
| Number of buttons | 5 single speed buttons,1 START button |
| Button Marking | English + number |
| Joystick | Two 5-steps Joysticks |
| Switch | 4 selector switch |
| I.D.Code | 4.3 billion |
| Voltage Warning | TX Red LED will flash slowly When the volts under 4.8V |
| Operating Frequency | 310.0325-331.165MHz |
| Channel Spacing | 0.2675MHz |
| Channel | 80CH |
| RF Power | ≤12DBm |
| Fault Detection | TX Red LED is flashing quickly: 1.Not in the correct way to start; 2.One of the pushbutton is jammed. TX LED will flash slowly: 1.Please change two new batteries |
Specification for F24-60 receiver
| RX Model | F24-60-RX-V-(E) |
| RX Size | 36x24x7.7cm |
| RX Weight | About2478g |
| Protection Degree | IP65 |
| Housing Material | Glass fiber-reinforced nylon-6 |
| Connection diagram | English |
| Temperature Rating | -35°C ~ +85°ºC |
| Power Supply | AC380V,AC36V,AC220V,AC110V,AC48V,AC24V, AC12V/DC12V,AC380V/AC220V(50-60Hz) |
| Relays | Max 40 Relays control functions(setted by programming tool), 1 relay control EMS |
| Output Relays | 5Amp Omniseal Relays(AC250V/10A Relays ,10Amp fuse) |
| I.D.Code | 4.3 billion |
| Operating Frequency | 310.0325-331.165MHz |
| Channel Spacing | 0.2675MHz |
| Channel | 80CH |
| Sensitivity | ≥-110DBm |
| Interface | Cable output |