Vivienne
Chongqing Gold Mechanical & Electrical Equipment Co., Ltd.
Email: gold04@hy-industry.com
Mobile / Whatsapp:+86-15123029803
Fax:+86-23-62940030 Skype:viviennecq
[Drilling Rig | Geological | Prospecting | Welllogger | BoreholeCamera | Inclinometer]
Product Description
XY-2BLB crawler water well drilling machine is developed based on our XY-2 core drilling rig , integrating drilling rig, crawler, mud pump, console rack and other devices into the integral one. It is mainly targeted at the shallow-medium hole of geology core drilling, and where the mobility is important. It is modular and integral drilling rig.

Application&Features

- Integrated crawler, rig, mud pump, console racks;
- Crawler, the whole support rigs and tower with ups and downs are controlled by the hydraulic system of the rig, easy to operate and transport;
- The whole set of equipment can move to relocate, improve drilling efficiency, reduce labor intensity;
- The tower has the function of ups and downs , folding , easy walking and transportation;
- Rig with more (8 block) the speed of progression and reasonable speed range, and the relatively large low-speed torque, wide range of application.
- Rig has two reverse gear speeds, easy to deal with incidents;
- Rig has longer feed stroke as long as 600mm, will help improve drilling efficiency and reduce blocking drill, burning accidents;
- Rig has double oil pump, less power consumption, lower oil temperature of hydraulic system;
- Rig has few control levers, rational layout, flexible and reliable operation;
- In addition there is a normally closed upper hydraulic chuck on , but also with lower mechanical man-powered chuck.
Specifaction

| 1 | Drilling depth (NQ drill rod) | Approximately 500m | |
| 2 | Spindle speed | Forward | 57; 99; 157; 217; 270; 470; 742; 1024 |
| Reverse | 45; 212 r/min |
| 3 | Spindle Maximum torque | 3200 N·m | |
| 4 | Spindle max pulling force | 60 KN | |
| 5 | Spindle stroke | 600 mm |
| 6 | Max. lifting force of the hoist with single rope | 30 KN | |
| 7 | Inner diameter of the spindle | 96 mm | |
| 8 | Retraction distance | 305 mm |
| 9 | Retraction distance for the host drill rig | 330 mm | |
| 10 | Retraction distance for both drill rig and tower | 160 mm | |
| 11 | Oil pump | SCB32/12 double gear pump |
| 12 | Power unit | engine power | 30 KW 1500 r/min |
| electric motor | 22 KW 1470 r/min |
| 13 | Crawler maximum walking speed | 1.2 km/h | |
| 14 | Crawler Climbing capacity | no more than 25 ° |
| 15 | Tracked Ground pressure | 0.042 MPa |
| 16 | Rig height | 8 m |
| 17 | Hook load of the tower | 29.4 kN |
| 18 | Max.static load of crown block beam | 58.8 kN | |
| 19 | Quantity of pulley | 2 |
| 20 | Angle range of tower ups and downs | 0°~ 90° | |
| 21 | Rig Dimensions ( tower horizontal position ) | (L*W*H) 4450×2166×3080 mm | |
| 22 | Total weight | 5500 kg |