220v 1hp Servo Driver 1000w Vfd For Servo Motor
   
   Product Function Introduction
  1 Support pulse command input and RS485 command input;
  2 Rich multi-functional ports, supporting common Yin and Yang connection;
 3 Support 17 bit single turn absolute vaLue encoder;
   
  4 Easy connection with touch screen (HMI)
 Simplified control system
 Save wiring
 Parameter setting and status monitoring
   
  5 Direct control via switch
 Minimalist motion control scheme
 Ultra low cost design
 Cyclic control of point motion
     
  Parameter:
  
   
  Wiring diagram of position control mode
     1. The internal +24v power supply voltage range is 20v~28v, and the maximum working current is 100mA.
  If an external 24V power supply is used, please connect the external power supply +24v to pin 16 (COM),
  and the external power supply 0V to pin 43 (e0v).
   
   2. The user of do output power supply needs to provide it by himself. The recommended
  working powersupply voltage is DC24V, and the conduction voltage drop of do port is about 2.4V.
  Please pay attention to it in application.The maximum allowable voltage of do port is DC30V
  and the maximum allowable current is 50mA.