Rack & Pinion VFD Drive 60M/Min Speed Construction Material Hoist SC200/200BG
Construction Material Hoist Design
The modular and standardizing system makes this construction lift be flexible, efficient, safe, productive, low energy consumptive and ownership cost.
Construction Material Hoist Optional Configuration
Sliding Contact Line (Busbar) power supply system which made specially for rack and pinion lifts is available.
An intelligent elevator control system, Multi-function Control System, with functions of fault detect, display and alarm, and automatic cage landing/stop and floor selector, is available.
Automatic greasing machine for rack and pinion elevator is availble.
Construction Material Hoist Technical Data
Item & Article No. | SC200BG, KP-B11; SC200/200BG, KP-B12 |
Payload Capacity | 2,000 KG per Cage |
Lifting Speed | 0–60 m/min. |
Max. Lifting Height | 450 m |
Cage Width (Internal) | 1.5 m |
Cage Length (Internal) | 3.2 m |
Cage Height (Internal) | 2.35 m |
Cage Doors | Flap Type Exit Door as Ramp is available |
Drive Unit | VFD (Variable Frequency Drive) |
Engine power per cage | 3x15 KW |
Gearbox | Helical Reducer |
Safety Device Type | Centrifugal Brake |
Power Supply Range | 380–500 V, 50 or 60 Hz, 3 Phase |
Mast Section | Square Column 650*650*1508 mm with Bolted Rack |
Rack module | 8 |