MachineU > China Products > Electrical Equipment & Supplies
electronic speaker socket connector JINJIA XLR-11-N3B with rated voltage 50V AC and current up to 7.5A
electronic speaker socket connector JINJIA XLR-11-N3B with rated voltage 50V AC and current up to 7.5A
Specifications
Description :
Through Hole Circular Connector Assemblies RoHS
Mfr. Part # :
XLR-11-N3B
Package :
Through Hole
Model Number :
XLR-11-N3B
Description

XLR JACK (Combo) SPECIFICATION

This specification applies to XLR jack (Combo) which is used in electronic products. It is designed for speaker socket connectors in electronic devices.

Product Attributes

  • Brand: Shenzhen Jinjiarun Electronic Technology Co., Ltd
  • Origin: Shenzhen
  • Document Number: JJR-WI-46
  • Issue Date: 2008-09-10
  • Version: A1

Technical Specifications

ItemPropertyTest ConditionPerformance
2. Rated /
2-1. Practical temperature rangeApplicable temperature range-30 to +80
Humidity range85% RH.MAX.
2-2. Preservation temperature rangeStorage temperature range-10 to +40
Humidity range85% RH.MAX.
Storage environmentSurrounding air without acid, alkaline or other corrosive gases. Storage period not exceeding 180 days.
2-3. Rated voltage and current(MAX.)Maximum rated voltage and current50V AC, 3A(Type A) / 7.5A(Type B)
2-4. AppearanceSurface conditionNo scratches, soil, rust or discoloration.
4. Electrical efficiency /
4-1 Withstand VoltageWithstand AC voltageBetween two non-contact terminals for 1 minute1500V (50/60Hz RMS). No dielectric breakdown shall occur.
4-2 Insulation ResistanceInsulation resistanceApply 500V DC between any contactless terminal and the other terminal for 1 minute 5 seconds.10000 M Min.
4-3 Contact ResistanceContact resistanceMeasure at the tail end of each terminal (voltage max. 20mV, current max. 100mA) for a pair of matched terminals.30 m MAX.
5. Mechanical Performance /
5-1 Insertion and withdrawal forcesInsertion/withdrawal speed2 mm/s
XLRMating of complete connectors without the effect of any latching or retaining deviceInsertion: 35 N max. Withdrawal: 2 N min.
JACKMating of complete connectors without the effect of any latching or retaining deviceInsertion: 40 N max. Withdrawal: 5 N min.
5-2 Terminal StrengthStrength testEach terminal should withstand a force of 0.5 kgf for 10 seconds.No looseness or damage. Terminal deformation is acceptable.
6. Durability /
6 Life testLife cycleUnder no load, rotate and then plug in, rotate and then pull out with a matching plug for 1000 times at a frequency of 5 times per minute.No obvious change in appearance or destruction. Contact resistance: less than 50 m.
7. Solderability /
7-1 Resistance to soldering heatSoldering conditionDip terminal in solder at 2603 for 51 seconds.Plastic base should not be deformed, and terminals should not fall off.
7-2 SolderabilitySoldering conditionDip in solder at 2453C for 30.5 seconds.Solder coating area should be more than 95%.
8. Environment test /
8-1 Cold testConditionPlace housing at -30 3 C for 96 hours, then under standard atmospheric conditions for 1 hour.Appearance: No obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V.
8-2 Heat testConditionStore housing at 802 for 96 hours, then under standard atmospheric conditions for 1 hour.
8-3 Humidity testConditionStore housing at 403 with 90% ~ 95% RH for 96 hours, then under standard atmospheric conditions for 1 hour.Appearance: No obvious change. Contact resistance: 50 m max. Insulation resistance: 500 M min. Withstand voltage: AC 1000V.
8-4 Temperature CyclingConditionPlace Jack under specified conditions, then in room temperature for 30 minutes.
8-5 Salt spray testConditionTemperature: 35 2. Solution: 5 1% salt. Spray time: 24 hours. Wash and dry at room temperature after experiment.Appearance: No obvious rust.
9. Test condition /
General conditionsTemperature, Humidity, Atmospheric Pressure15C to 35C, 25% to 85% RH, 86 kPa to 106 kPa.For doubtful judgments: 201C, 63% to 67% RH, 86 kPa to 106 kPa.
10. Amendment /
ProcedureSpecification changesNegotiated and agreed by manufacturer and customer.
12. XLR JACK (Combo) TYPE /XLR
TypeDescriptionType A, Type B

2411220040_JINJIA-XLR-11-N3B_C558585.pdf

Send your message to this supplier
Send Now

electronic speaker socket connector JINJIA XLR-11-N3B with rated voltage 50V AC and current up to 7.5A

Ask Latest Price
Product Detail
Description :
Through Hole Circular Connector Assemblies RoHS
Mfr. Part # :
XLR-11-N3B
Package :
Through Hole
Model Number :
XLR-11-N3B
Contact Supplier
electronic speaker socket connector JINJIA XLR-11-N3B with rated voltage 50V AC and current up to 7.5A

Shenzhen ECER Network Technology Co., Ltd.

Verified Supplier
1 Years
anhui, shenzhen
Since 2009
Business Type :
Manufacturer, Distributor/Wholesaler, Agent, Importer
Main Products :
FFC FPC Connector, Memory Connectors, Power Connectors
Total Annual :
10000000-50000000
Employee Number :
300~500
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Circular Connector Assemblies
MachineU China Products Electrical Equipment & Supplies
Contact Supplier
Submit Requirement