RFID Gateway Module EtherCat Industrial Communication 18-30V M12 Connector
Product Specifications
| Description |
RFID Gateway Module |
| Use |
Industrial communications |
| Output |
18-30VDC |
| Operating Temperature |
-30℃~+70℃ |
| Interface |
RS-485 |
| Application |
Industrial Communication |
| Current consumption |
<80mA@24V |
| RFID Connector |
M12 5Pin A coded Female |
Key Advantages
- High protection level and strong corrosion resistance for harsh industrial environments
- Supports mainstream PLCs with mature function blocks/routines
- Compatible with industrial communications including TCP/IP, Modbus TCP, PROFINET, EtherCat, and Ethernet/IP
- High stability and reliability for 24/7 operation
| Design |
Dual network ports with cascading support 6 RFID ports |
| Application Area |
Harsh industrial environments requiring multiple RFID connections to bus networks |
Electrical Interface
LK1/LK2 Ethernet interface uses 4Pin-M12-DCODED-Female connector:
| Pin |
Assignment |
Description |
| 1 |
TD+ |
Tranceive Data+ |
| 2 |
RD+ |
Receive Data+ |
| 3 |
TD- |
Tranceive Data- |
| 4 |
RD- |
Receive Data- |
Pi/Po Power supply interface uses 5Pin-M12-LCODED-Male/Female connector:
| Pin |
Assignment |
Description |
| 1 |
US (+24V) |
System power supply positive |
| 2 |
GNDL (0V) |
Load power supply negative |
| 3 |
GNDS (0V) |
System power supply negative |
| 4 |
UL (+24V) |
Load power supply positive |
| 5 |
PE |
Protective earth |
LED Operating Display
The gateway module's operational status is displayed through LED indicators in three categories: system status, RFID status, and bus status.
System Status Indicators
| Name |
Color |
State |
Description |
| SYS |
Blue/Red |
Off |
The GM is power off |
| Blue LED on |
The GM has completed initialization and is operating normally |
| Blue LED flashing |
The GM is running at default settings |
| Red LED on |
The GM is in BOOT mode |
| US |
Blue/Red |
Off |
Undefined (not used) |
| Blue LED on |
All RFID port voltages are normal |
| Red LED on |
There is an abnormal voltage on a single RFID port |
| Red LED flashing |
There are abnormal voltages on multiple RFID ports |
Technical Data
Electrical Specifications
| Supply voltage |
18-30VDC |
| Current consumption |
< 80mA@24V |
| Power protection |
Overcurrent, reverse connection, surge, ESD, FFT protection |
| Bus |
EtherCAT |
| Communication |
Dual network ports with integrated switching function |
| RFID port number |
6 |
Mechanical Specifications
| Housing Material |
Aluminum Alloy |
| Weight |
About 400g |
| Dimensions |
167.92x62.92x31.90mm |
Standards & Approvals
CE, FCC, RoHS, WEEE