Concrete Erosion Mat GCCM Rolls/Cement Sand Blanket Rolls For Slope Protection Or Ditch Lining
We, PIONEERTEX have four types of GCCM products to offer:
1. Concrete Mat Cloth(CMC) GCCM Rolls( Meet ASTM D8364):
CMC was reinforced by 3D spacer fabric.
CMC was backed with HDPE geomembrane to ensure waterproof.
CMC was not in conflict with CCUK’s patent. PioneerTEX can export CMC worldwide.
CMC Max Width: 2.1mts.
2. Cementex GCCM (Cement Cloth) rolls, cement cloth quality is as good as CMC.
Cementex GCCM=CMC without HDPE geomembrane backing;
Cementex price is better than CMC rolls.
Cementex GCCM Rolls Max.Width: 2.1mts.
3. Concrete Erosion Mat-Cement-Sand Blanket (CSB) GCCM rolls:
CSB is without HDPE geomembrane backing;
CSB is without 3D spacer fabric reinforcement;
CSB is with quilted stitch bonded together to ensure good integrity.
CSB is with geogrid reinforcement to ensure good compressive strength as Tiltex.
CSB Max. Width: 4mts.
4. Concrete Impregnated Canvas Rolls/Concrete Cement Canvas
CC was also made of 3D spacer cloth with concrete impregnated.
It is close to similar product made in UK.
PIONEERTEX CEMENT-SAND BLANKET (CSB) GCCM ROLLS TECHNICAL SPECIFICATION |
| | | | | | |
| PIONEERTEX CEMENT-SAND BLANKET GCCM ROLLS was mechanically needle punch bonded composite, |
| consist of cement-sand mix,embedded and fixed between two layers of geotextile, and it is also reinforced |
| by quilt stitched. |
| | | | | | |
| PROPERTIES OF GEOTEXTILE | TEST METHOD | VALUE |
Carrier layer- PP woven geotextile and geogrid composite | EN ISO 9864 | 230G/M2 |
Cover layer-PET nonwoven geotextile and geogrid composite | EN ISO 9864 | 300G/M2 |
| PROPERTIES OF CONCRETE | TEST METHOD | VALUE |
| Chemical Composition | N/A | sand-cement mixture+ 2% short fiber |
| Density | Typical | 1.5g/cm3 |
| Setting start | PN-EN 196-3 | > 120 min |
| PROPERTIES OF CSB GCCM | TEST METHOD | VALUE |
| Tensile Strength MD/CMD | EN ISO 10319 | > 20 KN/M(+/-10%) |
| CBR Puncture Strength | ASTM C 109-02 | >3.0 KN(+/-10%) |
| Compressive Strength | EN ISO 14617 | 40MPa |
| Bending Strength | EN ISO 12467 | 3-5Mpa |
| Water Permeability | EN ISO 12467 | no drop of water |
| durability against freeze-thaw | EN ISO 12467 | R>0.75 pass |
| durability against heat-rain | EN ISO 12467 | R>0.75 pass |
| durability against warm water | EN ISO 12467 | R>0.75 pass |
| durability against soak-dry | EN ISO 12467 | R>0.75 pass |
| Reaction to fire | EN 12467 | B-S1,dO |
| Standard Roll Dimensions | Typical Value |
| Thickness | 5-15mm |
| Width x Length/Roll | 2.0X5M or 2.0X10M or 2.0X20M/ROLL |
4. (CC), which is similar with made in UK.
But it is in conflict with CCUK’s patent.
PioneerTEX have stopped production on this material.
PioneerTEX GCCM Product Application:
1. Slope protection,
2. Ditch lining and bund lining.
GCCM Rolls Life expectation: 30 years.