80 PLUS power supply 500w Desktop PSU RPD500-60GHN(85)
The Product Features
- Worldwide Input Voltage 100Vac-240Vac
- Active PFC Within 0.99 Power Factor Correction
- Dual 12V Rails To Fulfill System Protection Demand
- Forward & Mega Amp To Offer High Performance And Efficiency
- 12cm Fan Provide Ultra Silent User Environment
PC PSU Introduction
- Dimension 140 (L) x 150 (W) x 86 (H) mm
- Output Wattage 500W
- Efficiency 82% 85% 82%
The PC PSU DESCRIPTION
This is the specification of Model RPD500-60HHN,(85); AC- line powered switching power supply with active PFC (Power Factor Correction) circuit, meet EN61000-3-2 features. Also, +5Vsb power is less than 0.5Winput at power off mode (PS_ON input at high state) which is comply with ErP Lot 6 year 2013 requirement.
APPLICATION: Desktop
WATTAGE: 500W
DIMENSION : 140mm(L) x 150mm(W) x 86mm(H)
PRODUCT HIGHLIGHT
- Efficiency Level: EU 230V 80Plus
- Erp Lot: <0.5W
- Input Voltage: 230V
INPUT SPECIFICATION
- Input Range: 220-240 Vac
- Input Frequency: 47-63 Hz
- Input Current: 230V@ <3.5 Amp (maximum)
OUTPUT SPECIFICATION
Output Rise Time:
- + 3.3Vdc : 20ms Maximum
- + 5Vdc : 20ms Maximum
- + 12Vdc : 20ms Maximum
- + 5Vsb : 20ms Maximum
- - 12Vdc : 20ms Maximum
Hold up Time: 115V/60Hz 17mSec. Minimum@80% Load,
GENERAL SPECIFICATION
- Efficiency: 82%@ 20% load; 85%@ 50% load; 82%@ 100% load
- PWOK Delay Time: 500ms > PWOK > 100ms
- EMC Performance: EN55022 class B
ENVIRONMENTAL SPECIFICATION
- TEMP.Range: Storage Temperature: -20°C to + 80℃
- Operating Temperature:10°C to+40°C
- MTBF: The power supply reliability, when calculated by “Bellcore” latest revision are exceed 100,000 hours with all output at maximum load and an ambient temperature of 25℃.
Output Voltage and Current Rating
| | +3.3V | +5V | +12V1 | +12V2 | -12V | +5Vsb |
| Ripple-Noise(R-P) mV | 50mV | 50mV | 120mV | 120mV | 120mV | 50mV |
| Regulation Load % | ±5% | ±5% | ±5% | ±5% | ±10% | ±5% |
| Output Max.(A) | 24A | 24A | 18A | 18A | 0.5A | 2.5A |
| Output Min.(A) | 0.1A | 0.2A | 0.1A | 0.5A | 0A | 0A |
NOTES
- +3.3V & +5V total output not exceed 123W.
- +12V2 peak current is 18A (less then 10m Sec.) , minimum voltage during peak is >11.0Vdc.
- +5Vsb peak current is 2.5A(less then 500m Sec.) , minimum voltage during peak is > 4.5Vdc.
This content is subject to change, please refer to specification for more detail.
Product Display
