80 PLUS power supply 500w Desktop PSU RPD500-60APN,(85)

The Product Features

• Worldwide Input Voltage 100Vac-240Vac
• Active PFC Within 0.99 Power Factor Correction
• Single 12V Rail To Fulfill Graphic Performance Demand
• Own Patent IC To Offer High Performance And Efficiency
• 12cm Fan Provide Ultra Silent User Environment

PC PSU Introduction

• Dimension 140 (L) x 150 (W) x 86 (H) mm
• Output Wattage 500W
• Efficiency 85% 88% 85%

The PC PSU DESCRIPTION

This specification describes a 500 watts power supply. With 5 output, and remote ON/OFF control for ATX-12V system and a “Power factor correction (active PFC)” circuit at 100V-240Vac

APPLICATION: Desktop

WATTAGE: 500W

DIMENSION : 140mm(L) x 150mm(W) x 86mm(H)

PRODUCT HIGHLIGHT

• Efficiency Level: 80PLUS Silver
• Erp Lot: <0.5W
• Input Voltage: 100~240Vac

INPUT SPECIFICATION

• Input Range: 100-240 Vac
• Input Frequency: 47-63 Hz
• Input Current: 115V@ 8.0 Amps-rms maximum 230V@ 4.0 Amps- rms maximum

OUTPUT SPECIFICATION

Output Rise Time:

• +3.3V 20mS (maximum)
• +5V 20mS (maximum)
• +12V 20mS (maximum)
• -12V 20mS (maximum)

GENERAL SPECIFICATION

• Efficiency: 85%@ 20% load; 88%@ 50% load;85%@ 100% load
• PWOK Delay Time: 500ms > PWOK > 100ms
• EMC Performance: EN55022 class B

​ENVIRONMENTAL SPECIFICATION

• TEMP.Range: Storage Temperature: -200°C to + 70℃
• MTBF:The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage.

Output Voltage and Current Rating

NOTES

• +3.3V & +5V total output not exceed 120W.
• When +5V is load to 20A, the +3.3V maximum load is 7.5A.
• When +3.3V is load to 24A, the +5V maximum load is 9A.

This content is subject to change, please refer to specification for more detail.