25HP Heat Pump Water Heater Commercial Unit for Hot Water AC
- Heat pump Features
- It is best substitute for coal furnace of community central heating station
- It use less than 30% electricity and more than 70% heat absorb from the air
- It is highly safe, efficient and no pollution
- It has fully protective advice to prevent from over-load, high voltage, low voltage, etc.
- It is as easy operation as AC unit
Yushen air source heat pump
- working conditions could be lowest to -25℃ to up to +45 ℃ /-13℉ to 113 ℉
- 35% more powerful than other products, long heating time and less defrosting time
- Jet boost compressor, keep high COP in extreme conditions
- Quality Components such as Copeland compressor, Danfoss valves
- Pay attention to details such as every stainless-steel screw has cushion to prevent from water corrosion
- 100% finished products testing
- fast prodution, daily productivity could be up tp 10 sets
Model data
| Model |
SDWA-075YBcode name.pdf |
| Compressor capacity |
25HP |
| Function |
Heat |
| Electricity |
380V 3N-50Hz |
| Working conditions |
℃ |
-25~+43 |
| Nominal heating capacity |
KW |
75 |
| COP |
KW/KW |
4 |
| Nominal input power |
KW |
20.5 |
| Max. running currency |
A |
60 |
| Highest water temperature |
℃ |
60 |
| Compressor quantity |
Set |
2 |
| Refrigerant/charging quantity kg |
/ |
R22/10*2 |
| Air blow type |
/ |
Top |
| Water pipe diameter |
/ |
50 |
| Rating flow |
m³/h |
12 |
| Water side pressure loss |
kPa |
≤45 |
| Noise level |
dB(A) |
62 |
| Overall dimensions(L×W×H) |
mm |
2100×1100×2080 |
| Weight |
kg |
830 |
Nominal heating conditions:ambient dry bulb temperature 7℃, web bulb temperature 6℃, water inlet temperature 9℃,water outlet temperature 55℃
Check more model herecatalogs-email.pdf