Horizontal 20-90r/Min Turning Hydraulic Hose coil Packing Machine automatic operation

MACHINE APPLICATION:

The horizontal 20-90r/min turning hydraulic hose coil wrapping machinery is particularly designed for realize tight and close packing needs for hose coils, pipe coils, and other coiled objects horizontally. The wrapped hose coils are perfectly sealed and looks tidy and beautiful for storage, transportation and market. Easy operation, low energy and material consumption, but with high packing efficiency and few labor cost.

BASIC FEATURES:

1. The hose packing machine is in horizontal structure with a working table convenient for manual handling.
2. Suitable for pack light coils which are easy to load and offload by manual.
3. Overlapping rate and film tension able to be adjusted according to needs.
4. Different packing material can be chose.
5. Indication lights alarm automatically when trouble appears.
6. The carrier rollers wrapped with polyurethane to protect the product surface.
7. Safe fence for turning parts ensure safe operation.
8. Automatic material feeding and cutting is available for choose.
9. The main wrapper engine can be designed moveable for convenient loading of heavy coils.
10. Conveyors can be equipped for automatic operation.

MAIN PARAMETERS

Note: the datas are only for reference, the machine can be custom designed according to specific object size.

Introduction to the operating panel switch:

POWER: The main switch of machine power supply which is used to connect or shut off the machine power supply.

EMERGENCY STOP: The control switch which is used to control circuit. Press to shut down the machine in case of emergency.

START: Press the button to make the ring working.

STOP: Press the button to make the ring stopped

RING RESET: Reset the ring, make the in& out of the object convenient.

ROLLER(FWD/REV):Used to put the roller under clockwise or anticlockwise when ring starts running.

RING JOG: Press the button, the ring runs slowly, and will stop when looses the button. Used to check if the ring runs through the coil center.

TIME: cutting time set. The packing material will be cut automatically after the set time. Adjust the time according to needs.