MachineU > China Products > Machinery > Cleaning Equipment > Air Cleaning Equipment > Humidifier
AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber
AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber
AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber
AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber
AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber
AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber
AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber
AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber
Specifications
Brand Name :
KOMEG
Model Number :
KMHW-17
Certification :
CE/ROHS/FCC/
Place of Origin :
China
MOQ :
1set
Price :
negotiation
Payment Terms :
T/T /C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow
Supply Ability :
50 sets per month
Delivery Time :
42 working days after received your payment
Packaging Details :
Packed in carton firstly,and then reinforced with wooden case for outer packing
Product Name :
Programmable Walk-in Test Chambers
Application :
reliability testing, research & development testing, failure analysis
Volume(M3) :
35.2CBM
Door Size :
Single Wing:W80*H180;Double Wing:W160*H180
Temp. Constancy :
+/-0.5oc
Humidity Constancy :
+/-2.5%R.H
H.S. Code :
90321000
Delivery :
42 working days
Installation :
Yes based on your arrangement of room and board
Description

Water Cooled Walk In Environmental Chamber Large Volume Constant Temperature ​

1. Walk-In Temperature and Climate Test Chambers

Able to accurately simulate a wide range of complicated natural environments, and is suitable for reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental testing equipment and test methods for the basic parameters of electric and electronic products under the condition of humidity, low temperature, high temperature, and constant heat.

Walk-In Chambers
Walk-In Chambers are available in a variety of models and sizes to meet virtually any requirement and/or test application. These chambers are big enough used for testing large size products.

There are two major types of walk-in chambers: modular and welded.

Modular walk-ins are constructed from pre-formed panels with urethane foam insulation, The temperature and humidity range must be limited due to this construction. Normally, the maximum high temperature for modular walk-ins is below 100 C.

Welded (Solid) walk-In chambers are fully welded chambers. Welded walk-ins are constructed chambers. The internal chamber is welded together to withstand more extreme temperature and humidity ranges. Due to the additional labor to construct this type of chamber, it is much more expensive than a modular walk-in.

2. Main Technical Parameters

Model KMHW-17
Volume(m³) 35.2CBM
Interior Dimensions W3900 x H2100 x D4300mm
Exterior Dimensions W5050 x H2350 x D4500mm
Safety Devices(standard) No fuse breaker, over pressure, over heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection
Standard accessories Sight window*1, cable port ( portΦ50mm ) *1, chamber lamp*1, status indicator
Control System Balanced Temperature & Humidity Control System
Refrigeration system Water Cooled
Semi-hermetic compressor, single stage or cascade refrigeration system,
CFC free refrigerant ( HFC-507 and HFC-23 )
Controller Panel 7-inch LCD Touch panel, Chinese or English display selectable
Operation model Program or fix point running
Memory capacity 120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles
Accuracy Temp.:0.1% of F.S ± 1 digit Humidity:0.1% of F.S ± 1 digit
Input Temp.: pt-100, Humidity: pt-100 or ～5V DCV
Comm.port RS-232 or RS-485 ( Softawre is option)
Temp. range Maximum: 80 ºC,120 ºC;
Minimum: -60 ºC, -50 ºC, -40 ºC, -30 ºC, -20 ºC, -10 ºC, 0 ºC
Humidity Range 10%, 20%, 30% ~ 95%
Temp. constancy ±0.5 ºC
Humidity constancy ±2.5%R.H
Temp. uniformity ±2.0 ºC
Humidity uniformity ±5.0%R.H
Ambient Temp. +5 ºC～+35 ºC
Wiring method AC 380 ± 10% 50Hz ,3 phase 4 wires + Ground Wires
Heat up time +20 ºC～+80 ºC, Within 60 min
Pull down time +20 ºC ~ -55 º, -40 ºC, -20 ºC, -10 ºC, Within 120 or 90 or 60 min
Interior material Stainless Steel Plate(SUS 304)
Exterior material Baked Painting Steel Or Stainless steel ( SUS304)
Insulation material Rigid polyurethane foam
Door size (mm) Single wing: W800 x H1800; Double wing: W1600 x H1800;
Note:1. We reserve the right to change specifications without prior notice 2.Customized sizes and configurations available

3.Walk-In Chamber Types

Model Number Temperature Range Humidity Range Temperature Change Recommended Use
Panel Walk-in -60°C to +85°C 20% to 95%RH 1 to 2°C/min
Temperature Cycling Temp / Humidity Cycling / Storage Testing
Solid Walk-In -60°C to +150°C 20% to 95%RH 4 to 5°C/min, or faster Temperature Cycling
Temp / Humidity Cycling
Extreme Temp / Humidity Testing
Altitude Testing
Steady State Walk-In -20°C to +50°C 20% to 95%RH N/A Constant Temperature
Constant Temp / Humidity
Storage Testing

4. Description

Flexibility for structure

The panels used in our chamber are 4” (100mm or 150mm) Thick urethane-foam sandwiched between a stainless-steel interior wall and a coated-steel exterior. An assembled box is self-supporting. So that no heavy structural members are required. Different door sizes, flooring upgrades,access ports, and other modifications are possible.

Widest test range, most customizable

5. Meet the standard

● GB-2423.2-2008(IEC68-2-2)Test B: High Temperature Test

● GJB360.8-2009(MIL-STD.202F) High Temperature Life Test

● GJBl50.3-2009(MIL-STD-810D) High Temperature Test

● GJBl50. 4(MIL-STD-810D) Low Temperature Test

● GB2423.3-2008(IEC68-2-3)Test Ca: Constant Heat Test

● GB2423.4-2008(IEC68-2—30) Test Db: Damp Heat Alternative Test

● GJBl50.9-2009(MIL-STD-810D) Damp Heat Test

6. Advantage

1.Energy-saving
  • Bypass mode to adjust cooling capacity to achieve a constant temperature and humidity effectively
  • Apply plate exchanger as intermediate heat exchanger to the cascade refrigerating system, ensuring high effective.
2.Easy operation
  • Using company owned brand KOMEG KM-5166 LCD touch screen controller with PID control parameters setting;
  • Flexible approach for data collection and recording
3.High reliability
  • Key parts are imported to ensure service life and high reliability

AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic ChamberAC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber

Specification for KMH-6000S.pdf

Product tags

water heating element with temperature control

,

constant temperature humidity chamber

,

cooling tower water temperature
Send your message to this supplier
Send Now

AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber

Ask Latest Price
Watch Video
Product Detail
Brand Name :
KOMEG
Model Number :
KMHW-17
Certification :
CE/ROHS/FCC/
Place of Origin :
China
MOQ :
1set
Price :
negotiation
Contact Supplier
video
AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber
AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber
AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber
AC 380 ± 10% 50Hz Stainless Steel Constant Temperature humidity Walk In Climatic Chamber

KOMEG Technology Ind Co., Limited

Active Member
11 Years
guangdong, dongguan
Since 1990
Business Type :
Manufacturer, Exporter
Main Products :
Climatic Test Chamber, Temperature Humidity Chamber, Environmental Test Chamber
Total Annual :
1000000 -3000000
Employee Number :
80~200
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Walk In Chamber
MachineU China Products Machinery Cleaning Equipment Air Cleaning Equipment Humidifier
Contact Supplier
Submit Requirement