

|
Parameter Name
|
Specification Model (Customizable)
|
Description
|
|
Number of Filling Heads
|
1-head, 2-head, 4-head, 6-head, 8-head
|
Customizable according to production capacity requirements; the more heads, the higher the production capacity.
|
|
Filling Capacity Range
|
10ml - 10000ml
|
Supports stepless adjustment; specifications can be quickly switched via the touch screen.
|
|
Production Efficiency
|
1000 - 12000 bottles/hour
|
Calculated based on 500ml specification; different numbers of heads correspond to different production capacities.
|
|
Measurement Accuracy
|
≤ ±0.2% (for conventional materials); ≤ ±0.1% (forgrade materials)
|
Achieved by closed-loop control of the servo motor, with little influence from material viscosity.
|
|
Servo Motor Power
|
0.75kw - 3kw per head
|
Matched according to filling capacity and material viscosity.
|
|
Power Supply Specification
|
AC 220V/380V/50Hz (three-phase four-wire); AC 220V/50Hz (for small-sized equipment)
|
Customizable according to regional voltage.
|
|
Air Supply Pressure
|
0.4 - 0.8MPa
|
Used for pneumatic components such as cylinder drive.
|
|
Material Contact Material
|
316L stainless steel, polytetrafluoroethylene (PTFE), food-grade silica gel
|
Meets food-grade and grade hygiene requirements, and has corrosion resistance.
|
|
Control Method
|
PLC control system + 7-inch touch screen
|
Supports functions such as parameter storage, fault alarm, and production counting.
|
|
Applicable Bottle Types
|
Round, square, and special-shaped bottles (diameter: 30 - 150mm, height: 50 - 300mm)
|
The height of the filling heads can be adjusted for adaptation.
|










