High Efficiency Flocculant Luquid PolyDADMAC Water Treatment Chemicals
PolyDADMAC is a high-purity, water-soluble cationic polymer belonging to the polyquaternary ammonium compound family. It is renowned for its exceptional charge density and effectiveness as a primary coagulant and organic flocculant. This product is specially formulated to neutralize negatively charged colloidal particles in water, facilitating rapid floc formation, improving clarification, and enhancing filtration processes across numerous industrial and municipal applications.
Key Benefits in WTP Operations
- Fast charge neutralization and strong floc formation for suspended solids removal
- Works alone or with polyaluminum based coagulants to optimize cost and performance
- Reduces sludge volume and improves filter press or centrifuge dewatering
- Broad operating pH window supports variable influent quality and seasonal shifts
Product Grades and Technical Data
| Parameter |
Typical range |
Notes |
| Solid content |
20-50% |
Multiple grades for process flexibility |
| Brookfield viscosity 25C |
150 cps to than 15000 cps |
Low to very high molecular weight options |
| pH as supplied |
About 3.0 to 7.0 |
Stable liquid easy handling |
| Operating pH window |
About 0.5 to 14 |
Wide adaptability in primary and secondary treatment |
| Appearance |
Colorless to light yellow liquid |
Consistent quality |
Typical Applications
-
Drinking Water & Municipal Treatment: As a primary coagulant for clarifying surface water (rivers, lakes, reservoirs) to meet potable water standards.
-
Wastewater Treatment: Used in primary and secondary clarification to remove BOD, COD, TSS, and phosphates from industrial and municipal wastewater.
-
Industrial Process Water: Clarification of water for use in manufacturing, cooling towers, and boiler feed systems.
-
Paper Manufacturing: Acts as a retention and drainage aid, as well as a flocculant in process water recovery systems.
-
Textile Industry: Used for effluent treatment and color removal from dyeing wastewater.
Dosage and Preparation
Liquid grade make up
Prepare solution at 0.5 to 5 percent by solids before dosing into coagulation or sludge lines.
Powder grade make up
Prepare solution at 0.5 to 10 percent by solids allow complete dissolution before use.
Optimization
Confirm dose by jar testing using actual influent. Select injection point and mixing to achieve fast dispersion without floc breakage.
Pairing program
Use alone as primary coagulant or combine with polyaluminum coagulants when higher color or NOM removal is required.
Packaging and Storage
Liquid grades
- 25 L plastic drums
- 200 L plastic drums
- 1000 L IBC containers
Powder grades
- 20 kg kraft paper bags with inner PE liner
Store in original containers in a cool dry place away from heat and direct sunlight. Follow label TDS and MSDS for handling and shelf life.
