Indonesia Alumina Processing Red Mud Sedimentation Polyacrylamide Flocculant Anionic PAM
-
Flocculant powder for Aluminium oxide performs as the flocculant to neutralize the electron in the red mud in the aluminium oxide industry, destabilize of particles and precipitate the flocs. The dosage is 0.2 -0.6kg/ton based on red mud. Different ore pulp has different settleability. Study is needed to to select the suitable flocculant for the high efficiency of red mud separation.Flocculant emulsion for Aluminium oxide is a special form of polyacrylamide. Mainly used in the separation and washing process of aluminium oxide manufacturing. With the help of emulsion, the separation speed is raised and the overflow supernatant also meet the requirement.
|
Products
|
Anionic Charge
|
Molecular Weight
|
|
Red Mud Settling Flocculants for Alumina (Powder)
|
Strongly
|
Very High
|
Red Mud Settling Flocculants for Alumina (Emulsion) |
Strongly
|
Medium
|
|
Red Mud Settling Flocculants for Alumina (Emulsion)
|
Very Strongly
|
High
|
Key Specifications:
|
ITEMS
|
Specifications
|
|
Appearance
|
viscous liquid
|
|
Viscosity,mPa•s
|
≥1000
|
|
Density,mg/l
|
1.01-1.06 |
|
pH
|
≥6.5
|
|
Flash point,℃
|
≥100
|
|
Solid content,%
|
≥35
|
|
Dissolution time,min
|
≤30
|
|
Ionic charge
|
20-40%
|
|
Molecular weight
|
High
|
Why choose US?
- Customized formula: provide anionic/cationic/nonionic PAM and PAC with different contents
- Global verification: products are used in coal mines in Central Asia, gold mines in Africa, copper mines in South America and so on
- Water Samples testing → Laboratory test to determine the best ratio
- Free sample → Free 1kg sample
- Long-term technical support → 15 years of stable operation guarantee
- After-sales service quick response → within 12 hours
Primary Effects

Instruction of polyacrylamide
- Before using,dissolve polyacrylamide with tap water at a ratio of 0.1%-0.5% and stir until fully dissolved.
- Do not use iron materials to stir or hold PAM, because the reaction performance of PAM will decrease when it encounters iron.
- The dosage needs to be calculated through laboratory pilot tests, with the aim of achieving the aggregation of flocs and presenting the phenomenon of sludge-water separation.
- It is better to use up the prepared PAM solution within 24 hours.
- Products should be stored in unopened package in a dry atmosphere at temperature no higher than 35℃.
Package of polyacrylamide
