Advanced Cationic Flocculant for Efficient Wastewater Treatment Solutions C8030 Grade

General Instruction:

• Cationic Polyacrylamide is water-soluble linear polymer with high molecular weight.
• It can absorb suspended solid particles in water, bridge and neutralize the charges between particles, especially the organic solids, and agglomerate the particles to form large flocs.
• It can effectively improve solid-liquid separation process in municipal and all industrial wastewater treatment, especially in sludge dewatering in different unit like belt press, plate press, screw press, and decanter centrifuge.

Application fields:

• Raw Water Treatment
  • Flocculation
  • Clarification
  • Dewatering of Lime Alum Sludge and Recovery of Water
• Industrial Waste Water Treatment
  • Primary Clarification
  • Secondary & Tertiary Treatment
  • Sludge Thickening & Dewatering
  • Color Removal
  • Dissolved Air Floatation
• Sewage Treatment
  • Primary Treatment
  • Sludge Thickening & Dewatering
• Process Industries
  • Paper Making: Retention, Resident Agent & Water Recovery
  • Sugar Manufacturing: Mud Settling
  • Thermal Power: Clarification of Scrubber Water
  • Mining & Metallurgy: Tailings Thickening and Water Recovery
  • Coal: Tailings Thickening and Water Recovery
  • Constructions: Soil and Road Stabilization, Concrete Making
• Petroleum and Gas Field:
  • Drilling fluids, EOR, Fluid loss control, Lubrication, Shale Stabilization

Advantages of OYIFLOC Polyacrylamide FLocculant

1. Excellent flocculation effect ,quick sedimentation and economical low dosage levels.
2. High level of water clarification after process.
3. Wide PH range ofapplication(5-14)
4. Good compatibility with inorganic coagulant.
5. Non corrosive of suggested dosage, economical and effective at low levels.
6. Reduction in sludge of dewatering process system.

Technical Specifications

Solution making of cationic polyacrylamide

1. Before using,dissolve polyacrylamide with tap water at a ratio of 0.1%-0.5% and stir until fully dissolved.
2. Do not use iron materials to stir or hold PAM, because the reaction performance of PAM will decrease when it encounters iron.
3. The dosage needs to be calculated through laboratory pilot tests, with the aim of achieving the aggregation of flocs and presenting the phenomenon of sludge-water separation.
4. It is better to use up the prepared PAM solution within 24 hours.
5. Products should be stored in unopened package in a dry atmosphere at temperature no higher than 35℃.

Why choose US?

• Customized formula: provide anionic/cationic/nonionic PAM and PAC with different contents
• Global verification: products are used in coal mines in Central Asia, gold mines in Africa, copper mines in South America and so on
• Water Samples testing → Laboratory test to determine the best ratio
• Free sample → Free 1kg sample
• Long-term technical support → 15 years of stable operation guarantee
• After-sales service quick response → within 12 hours