Product Specifications:

• •Semi-closed and full closure of the differences:
  •Semi-closed: from behind"You can see"Components on the circuit board; LCD viewing area: 51 * 24.5mm; font: 19 * 9mm
  •Full closure: from behind"See "Components on the circuit board; LCD viewing area: 61 * 24.5mm; font: 21 * 11mm
  •Range:AC80V ~ 500V

Technical parameters:

• •Operating voltage:Without having received an additional power supply, two-wire system
  •Low power consumption:0.2W
  •Wiring: terminal
  •Display:LCD,Blue backlight
  •Dimensions:79×43×25 mm
  •Installation hole:76×39 mm
  •Weight: about60g
  •Measurement rate: ≥2Secondary/ S

Extreme working conditions:

• •Working temperature:-10~+50
  •Humidity:10~80%(Non-condensing)
  •Working pressure:80~106kPa
  •Sunlight: no direct exposure

Main features:

• •Product stability, high measurement accuracy, strong anti-jamming capability
  •Overall use of standard size, easy installation
  •Two-wire direct testing, no external power supply

Working Environment Note:

1. Should be used in the temperature range 0~40C, humidity: ≤80%, to prevent undesirable phenomena caused by temperature changes.
2. Take care of vibration and shock.
3. Do not use it in places with dust, gas and chemicals harmful for electrical products.If the abnormal voltage is caused by the magnetic field, high frequency devices, high voltage spark, lightning and etc, please use the external power line filter or non-linear resistors to interfere and absorb the circuit.The signal input line should be as short as possible, and protective shielding wire should be used in places where there may be interfering signals. It is recommended to use twister pair in general conditions.

Further information:

1. Plastics materials: all raw materials are brand-new and second-hand materials are forbidden. Furthermore some of them are supplied by super branding companies like DSM, Mitsubishi.

2. There is just one level of quality as A in MEIHENG and we are aim to provide the excellent articles to our clients and help them gain more market shares.

3. ODM: we are providing ODM services to the super companies (more than 15) who are top-10 electrical industrial companies in their country. Just show us your ideas and we will present a solution.

FAQ

A. How's the delivery time?
Depend on your quantity, usually within 20days after receiving deposit

B. Would you accept OEM/ODM service?

Glad to say that there is planning department, technical department and mould tooling center in

our factory. For the OEM & ODM, it is ok for us if your brand, market shares are great.