1000ml 1:1 Cartrige Epoxy Chemcial Anchor Adhesive For Structural Strengthening
Chemical anchor adhesive, epoxy injection mortar, Chemical fixing glue,
Chemical anchoring system used for anchoring and rebar connections in concrete.

Item #: FixingChor110
Capacity: 1000ml
Materials: Epoxy
Mixing Ratio: 3:1


Product Description:

1000ml 1:1 Cartrige Epoxy Chemcial Anchor Adhesive For Structural Strengthening is

a two component, high tensile strength, modified pure epoxy chemcial anchor adhesive.chemical fixing system

strong fixing with exceptionally high chemcial resistance.Applied in one single action this resin will produce a high performance,

Suitable for

Non-cracked concrete

Reinforcement bars

For fixing of:

Steel constructions

Consoles

High-racks

Machines

Staircases

Wooden constructions

Reinforcement bars

Pass GB50728-2011

Humidity resistance testing

Freeze-thaw resistance Testing

Resistance to fatigue stress Testing

Resistance of long term stress testing etc .

Can be used in projects with Design Period of 50 years.

Approved for anchorings in

Railway or express way modification works

Structure reinforcement

Curtain wall installing

Concrete, cracked and non-cracked Applications

Rebar planting in concrete structures.

Bridge modification works

Keel fixing in out wall

ATTENTION

- Do not install anchors when the temperature is less than 10°C.

- If the cartridge is not finished, please clean the opening, then put the plug back and cap tightly.

- At temperatures below 10°C should be warmed or stored in temperatures

of 10-30°C for 24hours prior to use to improve product flow and cure.

- If the gelling time expires, please use a new static mixer.

- Do not cut or shorten nozzles.

- It can be used again in the future by replacing the static mixer.

- Please ensure hole is properly cleaned. Hole may be damp but must be free from water.

- Do not install anchors when substrate temperature is less than 0°C.