PHOENIX 329 Ruby Carat UV Rubber Printing Blanket Red Color

Application:

UV printings. Appropriate to package and metal UV printing.
Surface: Micro- ground and polished.
Compressible Layer: Micro-sphere


Characteristic:

UV solidification and ultraviolet rays resistant. Convenient use,
low thickness reduce for good print quality.
Attention:
1. Before installation pleasure measure the thickness of blanket for adjusting the
press accurately.
2. While installation please use the constant wrench to tighten gradually.
3. After installation please clean the rubber surface and ready for print.
4. During the use please often use the special solvent to clean the rubber surface
for extend the useful time.

1. UV‑Compatibility & UV‑Aging Resistance Test Data

Surface compound: EPDM rubber, chemically resistant to UV‑curing ink, UV varnish and aggressive UV‑washing solvents; resists rubber swelling, hardening and surface chalking caused by long‑term UV‑radiation exposure.

表格

Remarks: Not fit for water‑based ink only; designed primarily for UV‑ink / UV‑varnish offset printing, packaging & metal‑decorating printing scenarios.

Certification note: Authorization document available upon request; physical test report complies with ISO 12636‑2018 offset‑blanket standard.

2. Blanket Multi‑layer Structure Cross‑Section & Full‑spec Parameter Table

Structure layers from bottom to top:

1. Base fabric ply: multi‑ply high‑strength textile carcass, low‑elongation for stable tension
2. Micro‑sphere closed‑cell compressible layer: micro‑spheres compressible cushion layer, excellent rebound & smash‑resistance
3. EPDM functional rubber surface layer: micro‑ground polished red surface, chemical‑resistant for UV‑ink & washing‑solvent

Full Technical Parameter Table

表格

3. Compatible Offset Press Quick‑reference Table

表格

Note: Before mounting, measure real blanket thickness and adjust under‑blanket packing thickness according to press manual.

4. Installation Guide & Tightening‑step Diagram Note

Step‑by‑step Installation Procedure

1. Clean blanket cylinder thoroughly, remove old‑blanket residue & dirt. Measure blanket actual thickness and confirm packing‑sheet thickness setting for press.
2. Insert front edge into aluminum clamping bar; align blanket squarely, rubber printing‑surface faces outward.
3. Rotate press cylinder, wrap blanket smoothly without wrinkles or air‑bubbles; maintain uniform width‑wise tension.
4. Mount trailing‑edge aluminum bar; use torque‑wrench for progressive symmetric tightening, avoid one‑side over‑tightening.
5. After initial mounting, run press under impression‑on for approx. 1 000 impressions, re‑tension the blanket again.
6. Clean rubber surface with special UV‑blanket‑washing solvent before formal printing.

Important warnings: ‑ Excessive tension will shorten service‑life; insufficient tension causes blanket‑shifting & doubling‑print defect. ‑ Do not fold or crease blanket during handling and storage.

5. Press‑run Life & Replacement‑cycle Suggestion

表格

Maintenance tip: Frequently clean surface with special UV‑blanket‑washing solvent to extend service‑life.

6. Product Real‑shot Photos & Package Picture Notes (≥5 images)

7. Storage Condition & Packing Specification Guide

Packing Options

表格

Storage Requirements

• Storage temperature: 15‑25 ℃, avoid direct sunlight & UV‑light radiation
• Keep flat storage, strictly prohibit folding, bending or heavy‑pressure stacking
• Shelf‑life: 12 months under unopened original‑package condition
• Prevent contact with sharp‑hard objects to avoid surface‑scratch damage.

8. FAQ Frequently Asked Questions

Q1: What is MOQ? A: Minimum order quantity 1 square‑meter. Sample cut‑piece is available for press test. Bulk‑order quotation upon your required dimension & quantity.

Q2: What is delivery lead‑time? A: Standard‑size stock goods: 5‑8 working‑days after order confirmation. Custom‑cut / pre‑mounted‑aluminum‑bar: 10‑14 working‑days.

Q3: What customization can you offer? A: Custom cutting dimension; pre‑install aluminum / steel clamping bars according to press‑model requirement; roll‑form supply.

Q4: Logistics & shipping options? A: Express: DHL, TNT, FEDEX, UPS, EMS. Large‑volume bulk‑order by sea‑freight / air‑freight. Payment terms: T/T, Western Union.

Q5: Blanket surface swells after UV‑printing? A: Check: 1) Whether you are using special UV‑blanket‑washing‑solvent; common‑offset‑blanket‑cleaner will cause swelling for UV‑blanket. 2) Avoid long‑time solvent soaking on blanket surface.

Q6: Dot‑gain is too high, or doubling‑ghost‑image appears? A: Check: blanket‑tension uniformity; packing‑sheet thickness; cylinder‑pressure setting; surface smash‑indentation caused by paper‑clip / paper‑chip. Re‑tension blanket and re‑calibrate cylinder pressure.

Q7: Can I use this blanket for common oil‑based non‑UV offset printing? A: It can work for normal‑ink printing, but its EPDM surface‑formula is optimized for UV‑system; for long‑run non‑UV production, we recommend general‑purpose compressible blanket series.

9. Competitor Comparison Table

表格

Core selling‑point: Professional UV‑offset compressible blanket; anti‑swell EPDM surface, low‑elongation multi‑ply carcass; outstanding for carton‑packaging & metal‑decoration UV printing, realizes cost‑replacement for high‑priced imported blankets.

10. Customer Cases & Testimonials

1. South‑East‑Asia packaging printing factory Applied on Heidelberg CD102 UV‑packaging production line. Stable 900 000+ impressions; low dot‑gain, consistent solid‑ink density for cosmetic‑carton UV‑varnish printing.
2. Middle‑East metal‑decorating printing‑house Used for metal‑sheet UV offset printing. Good anti‑swell performance under repeated UV‑solvent washing; long‑term‑stable printing quality.
3. South‑American medium‑size printing‑plant Fit for Komori LS‑40 UV‑packaging press; custom‑cut‑size with pre‑mounted aluminum bars, convenient installation, reduces press‑downtime.

Customer feedback quote: “The PHOENIX 329 UV blanket performs well for our UV packaging jobs. EPDM surface resists UV‑ink and washing solvent swelling. Stable dot‑reproduction, good alternative for expensive imported blankets.”

Basic Original‑page Product Information

‑ Place of Origin: China ‑ Brand: CERES / YY ‑ Model: PHOENIX 329 Ruby Carat ‑ Color: Red ‑ Thickness: 1.96 mm ‑ MOQ: 1 sqm ‑ Delivery Time: 5‑8 days ‑ Payment Terms: T/T, Western Union ‑ Supply Ability: 50 pcs / week

If you need, I can convert this document into unified HTML format, consistent with previous CTP‑plate, UV‑varnish and UV‑ink product pages for direct import to your independent‑site source‑code editor.

1. EPDM surface compound resistant to UV inks and aggressive washing solutions
2. Extremely resistant compressible layer

3. Low dot gain
4. Best contrast values
5. Outstanding results in solid and half-tone printing

Our company offer

all kinds of ink,rubber blankets,ps plate,and other material of printing area.

We are agent of dozens of domestic and foreign brand.

ABOUT US