This explosion-proof pump-suction monitoring system provides comprehensive gas detection capabilities for industrial applications, featuring advanced sensor technology and robust construction for reliable performance in demanding environments.
| Detected Gases | Combustible gas, oxygen, flue gas, exhaust emissions, toxic and hazardous VOCs, etc. |
| Detection Principle | Electrochemical, infrared, PID photoionization (principle varies by gas); other gases support customization |
| Detection Method | Pump suction |
| Display Method | 7-inch LCD color screen |
| Display Units | ppm, mg/m³ |
| Measurement Range | 0-200 mg/m³ (optional; ranges not listed can be customized) |
| Resolution | 0.1 mg/m³ |
| Accuracy | ≤3% FS |
| Operation Method | Touch operation |
| Warm-up Time | ≤90 seconds |
| Response Time | T90 ≤90 seconds |
| Output Signal | GPRS, 4-20 mA, RS485 |
| Operating Humidity | ≤95% RH, non-condensing |
| Operating Temperature | -40°C ~ +60°C |
| Power Supply Voltage | AC220V, 50Hz ±1% |
| Operating Pressure | 86-106 kPa |
| Installation Method | Wall-mounted, pole-mounted |
| Protection Rating | IP54 |