Quality Guarantee iPhone LCD Screen 7G, 7P Mobilephone Touch Screen with 100% Working Tested pass

High sensitive sensor

When your face or hand approach to the sensors, the lcd light will be automatic closed to saving energy.

Middle frame

It use the best glue, strong and accurately connect point and it can be easy to install.

Screw hole

Neatly screw hole. It is easy to adding the screws.

Soft flex

High toughness and soft. When you bend the flex to test the lcd, the flex would not easy to broken.

Dust net

Each lcd come with the dust net on it.

Water-proof front glass

The water-proof glass can concentrate water into tiny droplets. Hign sensitive touch that make you more flexibility to use your phone.

Installation:
1. Please make sure you are a special repair technician, otherwise you will break the product.
2. Please test it by inserting the flex to your motherboard before installation, be sure you feel a gentle snap. If not, then try again, or the cable will not be connected properly and will not work functionality.

If you meet some problems like can't turn on, touch insensitive, flash, lines on screen etc, please follow below steps:
1. Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connector.
2. Disconnect and reconnect the flex cables from the motherboard side.
3. Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4. Make sure IOS has been upgraded to the latest version.
5. Please leave phone alone overnight and see if this problem persists in the morning. Sometimes there is static after installing that will go away after some time.


Warning: No protection & Inappropriate installation may cause injury. Please follow installation guide step by step.
1. Check the package before open it. If found break, Please contact Amazon or Seller for exchange.
2. Please switch off phone to avoid any electrical injury before installation.
3. Not charge phone to avoid any electrical injury during replacement.