Groove laminated pvc wall panels size 25 cm*8 mm for hotel decoration

Product description

1. Quick details

2. Test report

3. Installation

1) PVC wall panels can be fixed directly to the wall if the surface is relatively even and if the wall is dry, using shower panel adhesive, or fix on to a frame of wooden batons.

2) When fitting PVC wall panels, always fix to a frame of wooden batons.

3) When fixing PVC wall panels to wooden batons, the panels can be fixed through the extending backplate fixing tongue using staples with a staple gun, by hammer with panel pins / nails, with screws, or with panel adhesive.

4) To make a wooden frame, strap the wall with wooden battens placed approximately every 30-40cm according to the direction of assembly. If panels are assembled vertically, strap in the opposite direction horizontally, and vice-versa. If panels are assembled diagonally, the batons can be installed vertically, horizontally, or at right angles to the panels.

5) Start with the preferred end cap U, internal, external, or scotia. Insert the tongue side of the panel into the moulding.

6) Glue the panel, or panel-pin (nail), staple or screw the first panel through the backplate fixing tongue opposite the starting side.

7) Insert the tongue of the next panel into the groove and continue the installation of the panels in the same manner.

8) Use appropriate PVC profiles to finish all corners and ends.

5. Product detail

This pvc wall panels, with three grooves on the surface. The basic panel was covered with plastic film on the surface by glue, which makes the appearance looks like wallpaper, flower, marble, wood or any color you like can be made. Because of the beautiful design of the film, you will have more choice for the color.