High Speed Printer Slotter And Die Cutter

Rotary Die-Cutter Unit Features:

A. Die Cylinder (Lower)

● Ground and chromed high quality steel

● Dynamic balanced for stable running.

● Fixing hole distance is 50mm lateral.

● Creasing height is 22.60mm.

● Wooden die thickness is 13mm.

B. Anvil Cylinder (Upper)

● Ground and chromed high quality steel

● Dynamic balanced for stable running.

● Anvil cover thickness is 10mm,width is 252mm.

● Side to side oscillation of anvil cylinder( 50mm).

● Motorized gap adjustment between anvil roll and die cylinder.

C. Self-locking System Adopted for Pulling Roll Gap.

D. Cam bearing applied for the Pull Roll working, wear reduced and run more stable.

E. Cutting Registration Adjust System

● Planetary gear system

● Cutting registration controlled by PLC and motorized, 360°adjust.

● Lateral registration controlled by PLC and motorized, range ±10mm.

F. Anvil Speed Compensating System with Dependent Motor, range ±3mm.

G. With Anvil Grinding System for Keeping Smooth.

Safety instructions

Before operating this machine, please read the following safety guidance for complete understanding:

• Please operate this machine according to the manufacturer’s guidance and your factory relative safety operation regulations.
• A clean and neat working area should be sustained.
• All the safety protection devices should be placed properly in position and all the safety operation switches should be running normally.
• Operators should wear suitable uniforms and use all necessary safety devices (for example, to wear gloves when operating and inspecting the machines)
• Fasten the loose hair and clothes to avoid contact with movable equipment.
• Find out the damaged or worn parts of the machine and arrange the experienced technicians to repair or adjust the machine.
• Remember never touch the moving equipment manually or with tools.
• Lock the power source and be sure the keys are at your hand when making maintenances.
• Remind the non-duty persons to keep away far from the working area when switching off or starting the machine.

.