1, printing roller
1) Printing roller ¢ 405.6 (including diameter ¢ 410)
2) Seamless steel pipe material, surface grinding, hard chrome plating.
3) Balance correction and smooth operation.
4) Ratchet fixed coil plate shaft, full-hanging grooved hanging plate. It is equipped with a hanging correction function, which saves the hanging time and improves work efficiency.
5) When loading and unloading plates, the electric control of the foot switch is reversed.
6) Phase adjustment: The printing roller is equipped with automatic zero return device, and adopts PLC multi-function touch screen control, touch screen man-machine interface, click to enter the plate roller phase adjustment interface; with automatic zero return, automatic plate and preset print position, etc. Features.
7) The axial adjustment is electric adjustment, and the adjustable distance is 10mm each.
2, embossing roller
1) High-quality seamless steel pipe, which is made by deep hole boring and boring.
2) The outer diameter of the stamping stick is ¢154mm.
3) High frequency hot loading, double disc welding.
3) Balance correction, remove the centrifugal force and run smoothly.
4) The embossing roller gap dial shows electric adjustment, the adjustment range is 1-11mm, and it is connected by the cross slider. When adjusting, the transmission gear will always ensure the correct position to engage.

Slotter unit

Slotting phase adjustment

1.High precision inverter to adjust the speed, 360 degree adjustment, quick time.

2.Phase zero positioning device to guarantee slotting position sameness

Creasing wheel

1.Manual adjustment of creasing wheel and slotting knife head position through precise screw pole.

2.Creasing wheel down shaft, slotting knife down shaft adopt offset ring, close structure for precise positioning.

Slitting and slotting knife head

1.Blade thickness:7mm. Imported high quality alloyed moon-shaped saw slotting blades, high hardness, high endurability, high grindability.

2.Grinded and hard-chromed slotting shaft for stable running.

3.Manual adjustment of slotting knife head, creasing wheel and slitting knife head.

4.Auto detection device of slotting shaft circumferential position, auto record of the position and guarantee the position auto return.

5. Pre-creaser fixed before slotter.

6. Front knife and back knife seated on one shaft.