Spray Chipping Coat Protects The Undercarriage From Erosion And Salinization

Function:

Quick-drying [Spray Chipping Coat] is specially used to protect the bottom of the car to avoid oxidation and rust caused by long-term contact with the wet ground environment; it can also be sprayed on the skirt hem and the front and rear pump handles to avoid scratches caused by sand and stone impact during driving. It is especially suitable for protecting new cars, seafood cars, salt field cars and mechanical equipment from alkali water erosion and salinization.

Specification:

Product Advantages:

• Specifically protects the undercarriage, preventing oxidation and rust caused by long-term exposure to the moist ground environment.
• Can be sprayed on the side skirts, front and rear bumpers to prevent scratches caused by gravel impact during driving.
• Especially suitable for new cars, seafood transport vehicles, salt field vehicles and mechanical equipment, resisting alkaline water erosion and salinization.

Usage Method:

1. First, clean the area to be sprayed, removing oil, dust, rust and other debris.
2. Shake the product can for about 1-2 minutes to fully mix the contents inside.
3. Keep the can 20-30 cm away from the surface to be sprayed, and spray back and forth at a uniform speed to form a continuous protective film.
4. If a thicker coating is needed, repeat spraying 1-2 times after the first layer dries (about 10-15 minutes).
5. After spraying, invert the can and press the nozzle for 2-3 seconds to clean the remaining material in the nozzle to prevent clogging.
6. Avoid contact with water or other debris after application, and it can be used normally after completely drying (usually about 30 minutes).

Precautions:

• This product is a pressure container. Keep it away from fire, heat sources and direct sunlight to prevent tank explosion caused by high temperature.
• Ensure good ventilation during construction. Avoid prolonged use in confined spaces. It is recommended to wear protective gloves and masks.
• Keep out of reach of children. If it accidentally comes into contact with skin or eyes, rinse immediately with plenty of water and seek medical attention if necessary.
• Do not spray on high-temperature or moving parts such as brake systems, tires, and exhaust pipes, as this may affect their normal function.
• When the product is not used up, place the nozzle upward to avoid accidental spraying; store it in a cool and dry place, away from food and drinks.