1kg Rubberized Undercoating Paint - Improved Durability For Structural Reinforcement
Chassis Guarder Corrosion Protection And Structural Reinforcement
Advanced rubberized undercoating designed to provide comprehensive protection for vehicle underbodies, enhancing durability and structural integrity.
Primary Functions
- Protects underbody metal from water exposure, preventing rust formation
- Seals gaps between components and secures screws to prevent loosening during driving
- Reduces noise transmission from the undercarriage, enhancing in-cabin comfort
- Shields against gravel and debris impact, extending vehicle lifespan
Product Specifications
| Specification |
Details |
| Product Name |
Chassis Guarder (black) |
| Brand |
Biaobang |
| Application |
Maintenance (Rubber and Plastic Type) |
| Model Number |
VU10012 |
| Single Weight |
1kg / 35.27 oz |
| Carton Size |
365×280×266(mm) |
| Carton Specification |
12 bottles |
| Carton Weight |
14.68kg |
| Shelf Life |
3 years |
Product Advantages
- Anti-Corrosion Protection - Effectively isolates moisture, salt, and other corrosive elements, protecting metal underbody components and extending chassis lifespan
- Enhanced Fastening - Seals component gaps and secures bolts to prevent loosening caused by road vibrations, improving safety
- Noise Reduction - Minimizes road noise and gravel impacts, enhancing cabin quietness and driving comfort
- Impact Resistance - Shields against direct strikes from road debris and rough terrain, reducing mechanical damage risks
- Improved Durability - Comprehensive underbody protection lowers maintenance frequency, saving long-term repair costs

Application Method
- Clean Surface - Thoroughly wash the undercarriage to remove oil, rust, and debris; ensure it's completely dry
- Mask Areas - Cover non-target parts (exhaust pipes, brakes) with tape or plastic film
- Even Coating - Shake the coating well, then spray 2-3 layers evenly from approximately 30cm away, with 10-minute intervals between coats
- Cure - Let it dry for 24 hours before driving to allow full hardening
- Application Tip - Apply at temperatures between 10-30°C; avoid rainy or humid conditions
Important Precautions
- Work Environment - Operate in a well-ventilated area; keep away from open flames or high heat sources
- Safety Gear - Wear gloves, goggles, and a mask to avoid skin contact or inhaling fumes
- Drying Time - Avoid water exposure or car washing for at least 24 hours after application
- Regular Inspection - Check the undercoating annually or every 20,000 km; reapply if needed
- Professional Service - For best results, consult a technician to ensure even coverage and safety