Automotive Gear Oil With Synthetic Base Oils And Excellent Additives

Product Function:

A commercial vehicle gear oil formulated with synthetic base oils and excellent additives. Designed for use in axles and rear axles of vehicles subjected to extreme pressure and shock loads. Provides excellent performance and meets American Petroleum Institute API GL-5 quality levels. Higher performance requirements for driveline lubricants. Higher speeds,higher torque, and higher loads require improved lubricant formulations to maximise equipment life and minimise operating expenses. Extended drain intervals,in turn, place greater demands on the effectiveness of gear lubricant base stock and additive formulations.

Specification:

Product Certification:

• API GL-5 Certified

• Meets MIL-PRF-2105E standards
• Exceeds OEM requirements for Eaton, Meritor, and Rockwell axles

Advantages:

• Extreme Pressure Protection:

• 35% higher load capacity vs. mineral oils
• 500,000 psi film strength (FZG Test Stage 12+)
• Thermal Stability:
• 40% lower oxidation rate at 120°C
• 300°F continuous operation capability
• Cold Weather Performance:
• -40°C pour point
• 50% faster gear lubrication at startup

Operation Guide:

• Recommended For:
• ✓ Hypoid gear sets
• ✓ Planetary wheel ends
• ✓ Off-highway equipment
• Drain Intervals:
• Highway: 500,000 km
• Severe Duty: 250,000 km
• Change Procedure:
• Heat oil to 60°C for complete drainage
• Flush with 10% new oil
• Refill to manufacturer's spec

Notices:

• ⚠ Handling Requirements:
• PPE: Nitrile gloves + face shield
• Spill control: Use hydrophobic absorbents
• ♻ Environmental Compliance:
• Collect used oil per EPA 40 CFR 279
• Biodegradability: 65% in 28 days
• Storage Conditions:
• Max stack height: 3 drums
• Rotate stock every 18 months

Applications:

• Mining truck final drives
• Wind turbine gearboxes
• Military transport vehicles