Non-Disassembly Oil Consumption Treatment Kit Improves Oil Performance

Function:

This product contains imported PEA composite liquid, can effectively clean the oil pipeline, crankshaft oil sludge, while cleaning the oil ring and the second ring, so that the engine to restore the elasticity of the oil ring, and at the same time to restore the cylinder pressure; to restore the elasticity of the sealing elements, reduce oil leakage and tampering into the intake pipeline oil burning. Effectively activate the sealing ring, reduce the oil string into the cylinder combustion during cold start, alleviate the cold engine blue smoke, improve the oil viscosity. improve oil burning, delay gasket aging, oil pan gasket, valve cover gasket, crankshaft front and rear oil seal, camshaft oil seal, and other rubber and plastic gasket aging, preventing sealing is not tight. Restore the elasticity of rubber parts, reactivate the sealing elasticity of plastic, reduce oil leakage.

Specification:

Product Advantages:

• Powerful cleaning – Contains imported PEA compound to dissolve sludge and deposits, cleaning oil passages and piston rings.
• Restores piston ring elasticity – Cleans and frees stuck oil/compression rings, restoring cylinder pressure and reducing oil consumption.
• Revitalizes seals – Restores elasticity of rubber/plastic seals, minimizing oil leaks.
• Reduces cold-start oil burning – Prevents oil from entering the combustion chamber during cold starts, reducing blue smoke.
• Slows seal aging – Protects oil pan gaskets, valve cover gaskets, crankshaft seals, etc., preventing hardening and cracking.
• Improves oil performance – Enhances lubrication and reduces engine wear.

Usage Method:

1. Add before oil change – Pour the treatment into old engine oil prior to draining.
2. Idle the engine – Run the engine at idle for 15-20 minutes (avoid high RPMs).
3. Drain old oil completely – Follow standard oil drain procedure and replace the oil filter.
4. Refill with new oil – Drive normally after oil change; a second oil change after 500 km is recommended for best results.
5. Repeat for severe cases – Reapply every 5,000 km or as needed for persistent oil burning issues.

Precautions:

• Do not overdose – Follow recommended dosage; excess may compromise oil performance.
• Avoid skin contact – Rinse with soapy water immediately if contacted.
• Not for full-synthetic racing oils – May react with certain high-performance oils.
• Severe carbon buildup requires pre-cleaning – Use an engine flush for heavy deposits.
• Temporary increased smoke is normal – Caused by carbon removal and will subside.
• Store in a cool place – Keep away from heat and children.