Ideal For: Brake Discs, Calipers, Drums, Pads, and Industrial Metal Parts

How to Use:

1. Preparation
   Shake the can well. Ensure the machinery is powered off and surfaces have cooled down.
2. Precision Spray
   Aim the nozzle 15-20cm away from the target area. Spray generously to flush away contaminants.
3. Agitation (Optional)
   For extreme carbon buildup, use a brush to assist the solvent.
4. Air Dry
   Allow the product to evaporate naturally. No rinsing with water is required.

Cautions:

• Fire & Explosion Prevention
  Highly Flammable: Keep away from heat, sparks, open flames, and hot surfaces. No smoking during use.
  Aerosol Safety: Do not pierce or burn the container, even after use. Protect from sunlight and do not expose to temperatures exceeding 50°C (122°F).
  Electrical Safety: Ensure the machinery is fully powered off, and there is no static electricity buildup before application.
  
• Health & Personal Protection
  Ventilation Required: Use only outdoors or in a well-ventilated area. Avoid breathing dust, fumes, gas, or vapors.
  Skin & Eye Contact: Avoid contact with eyes and skin. Wear protective gloves and safety glasses. If contact occurs, rinse immediately with plenty of water for at least 15 minutes.
  Do Not Ingest: If swallowed, do not induce vomiting. Seek medical attention immediately.
  

• Material Compatibility
  Sensitive Surfaces: While safe for most metals, this product may react with certain rubbers, plastics, or painted surfaces.
  Pre-test Recommended: Always test on a small, inconspicuous area before full application to ensure compatibility.
  Electronics: Avoid direct spraying on sensitive electronic circuit boards or screens unless specified.

• Proper Storage & Disposal
  Storage: Keep in a cool, dry place. Store locked up and out of reach of children and pets.
  Eco-Friendly Disposal: Dispose of contents and container in accordance with local, regional, and international environmental regulations. Do not pour into drains or water sources.