APPLICATION:

• Surface Restoration: Perfectly covers old paint surfaces and repairs imperfections caused by wear, scratches, fading, or minor corrosion.
• New Finishing: Provides a first-time coating for new products or components, providing long-lasting protection and a highly decorative appearance.
• Rust and Corrosion Protection: Provides a reliable rust-proofing layer for equipment and structures exposed to outdoor conditions, high humidity, or corrosive environments (such as workshops and warehouses).
• Color Identification and Coding: Used for zone demarcation, pipeline marking, safety warnings, or equipment classification within factories, with rich colors for easy identification.

DIRECTIONS FOR USE:

1. Cleaning and Sanding: Wipe the surface clean, oil-free, and rust-free! Ensure the workpiece is clean and dry, and briefly sand away any rust and old paint to improve adhesion.
2. Shake to Preheat: Shake the spray can vigorously for 1 minute until you hear a small ball sound. Preheat the spray can with warm water for optimal results!
3. Spraying in Multiple Layers: From a distance of 20 cm, spray at a steady speed. Apply each coat thinly, leaving 5 minutes between coats until complete coverage.
4. Fully Cured: Surface-dry in 10 minutes, touchable in 1 hour, and fully durable after 24 hours.

WARNINGS:

• [Ventilation] → Use in well-ventilated areas; otherwise, it may be harmful!
• [No Fire] → Smoking, sparks, and any open flames are strictly prohibited in the construction area!
• [Protection] → Always wear goggles, a mask, and gloves!
• [Contact] → Avoid contact with skin. If spray paint splashes into eyes, rinse immediately with plenty of water and seek medical attention!
• [Storage] → Store in a cool, dark place, away from heat and children!
• [Empty Can] → Do not puncture or incinerate empty cans.