Wire Mesh Demister Column Internals With Excellent Filtration Performance
Wire mesh demisters are widely used when a effective separation between liquid and solid phase is very important in order to obtain cheap and efficient industrial processes.
This kind of separators are made by a alveolar structure of wire mesh obtained by the superposition of several layers of a tubular sock. This sock is weaved by very thin wires (usually with a diameter inferior to 0,3 mm) and that allows to obtain a structure with high free volume (usually > 95%), a big active surface with a low density of the mesh allowing a saving about used material and costs.
Specification of Mist Eliminator, Demister Pad
(1) Standard Type
| Wire Diameter | Width Tolerance | Density | Surface Area | Void Fraction | ||
| Flat Wire | Round Wire | ±20 | 150 | Flat Wire | Round Wire | 0.981 |
| 0.1*0.4 | 0.23 | 475 | 320 | |||
(2) High Penetration
| Wire Diameter | Width Tolerance | Density | Surface Area | Void Fraction | ||
| Flat Wire | Round Wire | ±20 | 98 | Flat Wire | Round Wire | 0.9875 |
| 0.1*0.4 | 0.23 | 313 | 217 | |||
(3) High Efficiency
| Wire Diameter | Width Tolerance | Density | Surface Area | Void Fraction | ||
| Flat Wire | Round Wire | ±20 | 182 | Flat Wire | Round Wire | 0.977 |
| 0.1*0.28 | 0.19 | 626 | 484 | |||
Application:
- to purify gasses;
- to eliminate liquids that could damage the production processes;
- to prevent problems to the plant structures;
- to prevent dangerous emissions for the environment;
- to recover expensive liquids
