200x300mm 100% Molded Carbon Fiber Sheet Laminate Plate Panel 3K Twill Matte Finish

Due to the high stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion of the carbon fiber material, it is widely used in some specialized and high performance products. Such as aerospace, RC Drones, RC Helicopters, RC cars, UAVS, car decorations, Sports equipment and musical instruments and etc.

Whether you’re making your own drone frames, car chassis, firewalls, bulkheads or any other custom designs that require high-strength, lightweight material, these quality carbon fiber sheets are more than up to the task. Aerospace and space were some of the first industries to adopt carbon fiber. The high modulus of carbon fiber makes it suitable structurally to replace alloys such as aluminum and titanium.

These high-quality carbon fiber sheet plates come in various sizes, made from 100%, 3K plain weave carbon fiber, and finished with a matt surface on both sides. Unlike many low-cost carbon sheets that are made by pressing two outer skins of carbon fiber over a carbon and resin core, these plates are made with layered sheets of carbon fiber and resin, making them the same strength all the way through.

Our focus is on manufacturing high-quality materials that you can count on to perform consistently in high-performance applications subject to extreme conditions. All carbon fiber plates you find online is not equal. Material selection and plate manufacturing methods will ultimately determine the material strength and stiffness. We manufacture this plate using high-performance materials and high-quality manufacturing methods. Backed by years of experience and thousands of hours of research, we remove the guesswork so that you can rest assured you will end up with quality parts at a cost you can afford. These panels leave the mold with a beautiful high-gloss surface on one side and a matte finish on the other side for bonding.

Panel Basics

This panel has a 2×2 twill weave pattern, one of the most common weave patterns in many markets. The finished side of the panel has a classic 2×2 twill, 3K woven carbon fiber appearance and is nearly pinhole-free with a high-gloss finish. The backside of the panel showcases a matte textured ‘peel ply’ finish suitable for secondary bonding, if necessary.

Features

1. Made of Carbon Fiber material
2. Very Strong and Light
3. Smooth finish
4. High Tensile Strength
5. Excellent quality
6. Resistance to ultraviolet light.
7. Anti-aging and corrosion resistance

Carbon Fiber Sheet Plate Specification: