Heat Resistant 100% 3K Glossy Surface Carbon Fiber Plate - Aerospace Grade

The carbon fiber is aerospace-grade Unidirectional and Woven carbon fiber, pre-preg with a highly-toughened epoxy resin used to build jumbo jet airliners. It is cured at 350°F for 120 minutes at 100 psi. They are quasi-isotropic using 0, 90, and +/-45 degree layup for maximum strength, 28 layers thick with plain weave on the outside.

Our Carbon Fiber Panels are constructed with the same certified carbon fiber that is currently used in state of the art aircraft and sailing yachts. ?With the use of certified T-300 carbon fiber fabric all of our carbon fiber panels are made to the highest standards in both manufacture and material.

Carbon fiber panels have physical properties that are similar to steel. However, the stiffness of carbon fiber is superior to that of an equivalent piece of steel while also remaining much substantially lighter and is similar to plastic in weight. This gives the carbon fiber panels a much higher strength to weight ratio by comparison.

Product Feature:

100% 3K Carbon Fiber Strong Strength and Light Weight.
Perfect for any application including RC, drones, helicopters, etc.
The surface is cross grain, a nice surface without any glass fiber contents.
These carbon fiber sheets contain 100% carbon fiber imported from Japan.
It is especially applicable for Multicopter, Helicopter, and RC airplanes.

Product Application:

1. Aerospace, RC model parts Helicopters Model Drone, UAVS
2. Decoration parts for Car and jewelry
3. Manufacture fixtures and tooling
4. Industrial automation and robotics
5. Sports equipment
6. Musical instruments
7. Scientific Apparatus
8. Medical device
9. Others

Carbon Fiber Sheet Plate Specification: