MachineU > China Products > Tools & Hardware > Machining > Milling Cutter
Solid Carbide Milling Cutters GU25UF Raw Material High Performance
Solid Carbide Milling Cutters GU25UF Raw Material High Performance
Solid Carbide Milling Cutters GU25UF Raw Material High Performance
Solid Carbide Milling Cutters GU25UF Raw Material High Performance
Specifications
Model Number :
E600
Place of Origin :
MADE IN CHINA
Brand Name :
KTC
Certification :
CCC
MOQ :
10 pcs
Price :
Negotiation
Packaging Details :
1PC/ PVC Packing, 10pcs PVC Packing/Pack...
Delivery Time :
1-35days
Payment Terms :
T/T, L/C,Paypal...
Supply Ability :
10000pcs/week
Product Name :
Solid Carbide Milling Cutters GU25UF Raw Material High Performance
Raw Material :
GU25UF
Coating :
AlTiN or TiSiN
Color :
Black/Copper
Hardness :
>92HRA
Cutting Diameter :
Based on the flute length
Precision :
High precision
Co :
12%
Grain size :
0.4 μm
Flutes No. :
4 Flutes
Description

Solid Carbide Milling Cutters GU25UF Raw Material High Performance

Specifications

E600 high performance milling cutter series is made of domestic well-known high-quality fine grain tungsten steel material, with flexural strength of 4300mpa and grain size of 0.4 μm, and is coated with AlTiN or TiSiN imported from Switzerland. The cutter is designed with large helix angle, which can realize high-speed and efficient machining, especially suitable for medium and high carbon steel, die steel, pre-hardened steel and other materials processing. With high precision quality control, and full inspection, all E600 series end mills are delivered with 100% qualification rate.

Material GU25UF
WC 88%
Co 12%
TRS >4300N/mm2
Hardness >92HRA
A.O.L 50mm-150mm
Grain size 0.4μm
Upto HRC60
Flutes No 4 Flutes
Coating AlTiN or TiSiN
Suitable for Steel,stainless steel,nickel alloy,Titanuim alloy,cast iron,plastic and other materials

Coating:

Item AlTiN TiSiN
Hardness(HV): 3200 3600
Thickness(μm): 2.5-3 3
Oxidation Temp(°): 900 1000
frictional Coefficient: 0.3 0.45
Color: Black Copper

Standard Sizes

Size Flute Length of End Mills(mm)
Flat end Ball Nose Round nose
D1*D4*50 3 2 3
D1.5*D4*50 4 3 4
D2*D4*50 5 4 5
D2.5*D4*50 6 5 6
D3*D4*50 8 6 8
D3*D3*50 8 6 8
D3.5*D4*50 9 7 9
D4*D4*50 10 8 10
D1*D6*50 3 2 3
D1.5*D6*50 4 3 4
D2*D6*50 5 4 5
D2.5*D6*50 6 5 6
D3*D6*50 8 6 8
D3.5*D6*50 9 7 9
D4*D6*50 10 8 10
D6*D6*50 13 10 13
D6*D6*50 15 12 15
D7*D8*60 17 14 17
D8*D8*60 20 16 20
D10*75 25 20 25
D12*75 30 24 30
D14*100 45 28 35
D16*100 45 32 40
D18*100 45 36 40
D20*100 45 40 40

Flute Length of Extended End Mills(mm)
D3*D4*75 12 6 12
D4*D4*75 16 8 14
D5*D6*75 18 10 15
D6*D6*75 24 12 20
D8*75 25 16 25
D3*D4*100 12 6 15
D4*D4*100 20 8 15
D5*D6*100 20 10 20
D6*D6*100 30 12 25
D8*D8*100 35 16 30
D10*100 40 20 30
D12*100 45 24 35
D6*D6*150 45 12 40
D8*D8*150 50 16 45
D10*150 55 20 50
D12*150 55 24 55
D14*150 60 28 60
D16*150 70 32 65
D18*150 70 36 70
D20*150 70 40 70

Solid Carbide Milling Cutters GU25UF Raw Material High Performance

Type

A variety of grooves, slots, and pockets in the work-piece may be produced from a variety of tool bits. Common tool bit types are: square end cutters, ball end cutters, t-slot cutters, and shell mills. Square end cutters can mill square slots, pockets, and edges. Ball end cutters mill radiused slots or fillets. T-slot cutters mill exactly that: T-shaped slots. Shell end cutters are used for large flat surfaces and for angle cuts. There are variations of these tool types as well.
There are four critical angles of each cutting tool: end cutting edge angle, axial relief angle, radial relief angle, and radial rake angle.
Depending on the material being milled, and what task should be performed, different tool types and geometry may be used. For instance, when milling a material like aluminium, it may be advantageous to use a tool with very deep, polished flutes, a very sharp cutting edge and high rake angles. When machining a tough material such as stainless steel, however, shallow flutes and a squared-off cutting edge will optimize material removal and tool life.
A wide variety of materials are used to produce the cutting tools. Carbide inserts are the most common because they are good for high production milling. High speed steel is commonly used when a special tool shape is needed, not usually used for high production processes. Ceramics inserts are typically used in high speed machining with high production. Diamond inserts are typically used on products that require tight tolerances, typically consisting of high surface qualities (nonferrous or nonmetallic materials). In the early 90s, use of coatings to reduce wear and friction (among other things) became more common.
Product tags

tungsten carbide milling cutters

,

carbide milling cutters

,

milling cutter carbide
Send your message to this supplier
Send Now

Solid Carbide Milling Cutters GU25UF Raw Material High Performance

Ask Latest Price
Product Detail
Model Number :
E600
Place of Origin :
MADE IN CHINA
Brand Name :
KTC
Certification :
CCC
MOQ :
10 pcs
Price :
Negotiation
Contact Supplier
Solid Carbide Milling Cutters GU25UF Raw Material High Performance
Solid Carbide Milling Cutters GU25UF Raw Material High Performance

Changzhou Xinpeng Tools Manufacturing Co.,Ltd

Verified Supplier
6 Years
jiangsu, changzhou
Since 2003
Business Type :
Manufacturer
Main Products :
Carbide End Mill Cutter, Aluminum End Mills, Ball Nose End Mill
Total Annual :
500-1000
Employee Number :
1~200
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Carbide End Mill Cutter
MachineU China Products Tools & Hardware Machining Milling Cutter
Contact Supplier
Submit Requirement