Orange 3 Inch 4 Inch 5 Inch 6inch Sponge Polishing Pad

BT-6024 Sponge Polishing Pad black in fine grade
BT-6025 Sponge Polishing Pad orange in medium duty
BT-6026 Sponge Polishing Pad yellow in heavy grade duty
The size and thickness are the same. just in a different grade.
for 6 Inch 150mm Backing Plate Compound , Cutting Polishing Pad Kit
For Car Buffer Polisher Compounding , Polishing and Waxing

Car Polishing pads: Key Features to Consider:
Pad Size: The pad's diameter is normally between 3 and 8 inches, depending on the area being polished.
Pad density: The hardness of the foam influences the aggressiveness of the pad. Higher-density (hard) pads are more aggressive, whilst lower-density (soft) pads are used for finishing.

Attachment Method: Most pads are attached to polishers via hook-and-loop (Velcro) backing, making them simple to replace.
Certainly! Here's an overview of the specs for cutting, polishing, and finishing pads. Note that these specifications may differ based on the brand and product line, but they usually include information about pad size, foam density, and intended application.

Cutting Pad Specifications:
- Diameter: 3 inches, 5 inches, 6 inches, 7 inches, and 8 inches
- Foam density is high (stiff).

- PPI (Pores Per Inch): 50-80 (a lower PPI allows for more aggressive cutting).
- Material: Coarse foam, microfiber, or wool.
- Thickness: 1 to 1.5 inches.
- Intended Use: Heavy defect elimination (deep scratches, oxidation, and swirl marks).
- Color: Cutting pads are typically colored in darker tones, such as yellow, orange, or blue.
- Surface Type: Flat, open-cell construction to improve airflow and heat dissipation.
- Cutting Ability: High cutting ability, with potential for micro-marring or haze.
Polishing Pad Specifications:
- Diameter: 3 inches, 5 inches, 6 inches, 7 inches, and 8 inches
- Foam density: Medium.
- Pores Per Inch (PPI): 60-80 (moderate PPI for balanced cutting and polishing)
- Material: medium to fine foam.
- Thickness: 1 to 1.5 inches.
- Intended Use: Refine the surface after cutting, light flaw removal.
- Color: Typically colored in lighter tones, such as white, green, or light blue.
- Surface Type: Flat or slightly concave for easier polish application.
- Cutting Ability: Moderate, suited to remove tiny scratches and improve gloss.
Finishing Pad Specifications:
- Diameter: 3 inches, 5 inches, 6 inches, 7 inches, and 8 inches
- Foam density: low (soft)
- PPI (Pores Per Inch): 70-100 (greater PPI for less cutting and smoother application).
- Material: ultra-soft foam.
- Thickness: 0.75 to 1.25 inches.
- Intended Use: Final polishing, applying waxes, sealants, or glazes
- Color: Typically in very pale hues (e.g., black, red, or gold).
To limit the likelihood of swirl marks, choose a flat or waffle surface.
- Cutting Ability: Low to non-abrasive; engineered to maximize gloss without removing material.