The 40KN Aluminum Alloy Conductor Gripper is designed for adjusting sag during overhead transmission line wire erection and conductor stringing work. It is suitable for ACSR300-400 conductors, with a rated load of 40KN and a maximum jaw opening of 32mm.

Made of high-strength aluminum alloy, this conductor gripper provides reliable clamping performance while keeping the tool lightweight and easy to operate on site. It is widely used in power line construction, conductor tensioning, sag adjustment, and overhead line installation projects.

During transmission line erection and sagging work, contractors often face:

• Difficulty in holding ACSR conductors securely during tension adjustment
• Conductor slipping during sag correction
• Heavy tools increasing worker fatigue during tower or field operation
• Risk of conductor surface damage caused by unsuitable clamps
• Low efficiency when adjusting conductor sag on site

These problems are usually caused by:

• Incorrect jaw size that does not match conductor diameter
• Insufficient rated load for tensioning work
• Poor grip structure causing unstable clamping
• Heavy steel tools increasing handling difficulty
• Clamp surface not properly designed for ACSR conductor protection

This aluminum alloy conductor gripper solves these problems by:

• 40KN rated load - suitable for reliable conductor tensioning and sag adjustment
• Max gap 32mm - fits ACSR300-400 conductor sizes
• Aluminum alloy body - lightweight, strong, and easy to carry
• Serrated clamping jaw - improves grip stability and reduces slipping
• Application for wire erection and sagging - designed for transmission line construction work

The conductor gripper is fixed onto the ACSR conductor during wire erection or sag adjustment. When connected with a hoist, puller, or tensioning device, the gripper holds the conductor firmly and allows workers to adjust the conductor tension and sag safely.

The aluminum alloy body reduces tool weight, while the clamping jaw provides strong holding force on the conductor. This helps improve construction efficiency and ensures stable sagging operation in overhead line projects.

This ACSR conductor gripper is widely used for:

• Transmission line construction
• Overhead conductor erection
• ACSR conductor sag adjustment
• Power line stringing work
• Conductor tensioning and holding
• High-voltage line installation projects

Choose this model when:

• The conductor is ACSR300-400
• Required working load is around 40KN
• Conductor diameter is within 32mm jaw opening
• The project requires sag adjustment during wire erection
• Lightweight aluminum alloy tools are preferred for field operation

For smaller conductors, choose a smaller jaw opening model.
For larger conductors or higher tension, choose a higher rated load conductor gripper.