160 * 160 dots FSTN graphic LCD module — a 3.0-inch class, transflective FSTN display built around the ST75161 controller, with a 4-wire serial interface, 3.3 V logic and a white LED backlight. Designed for power data concentrators, metering panels and industrial instruments that must stay readable in ambient light and across −40 to +70 °C.
The BXD160160E2G-FF64L-VA is a 160 * 160 dot matrix LCD module. The panel is FSTN positive with a transflective polarizer, driven at 1/160 duty and 1/11 bias with VLCD 15.5 V. Display data is written by a 4-wire serial interface to the ST75161 controller, which carries its own 160 * 161 * 2 bit DDRAM and drives 160 segments and 160 commons. A white LED backlight (Vf 3.3 V typical) supports use in dim cabinets, while the transflective film keeps the screen readable in daylight without the backlight.
| Model | BXD160160E2G-FF64L-VA |
| Display format | 160 * 160 dots |
| LCD type | FSTN, positive, transflective |
| Drive method | 1/160 duty, 1/11 bias, VLCD 15.5 V |
| Viewing direction | 6 o'clock |
| Controller | ST75161 |
| Interface | 4-wire serial (SDA / SCL / A0 / CSB), 3.3 V logic |
| Module size | 83.80 (W) * 76.00 (H) * 8.50 max (T) mm |
| Viewing area | 60.00 * 60.00 mm |
| Active area | 54.38 * 54.38 mm |
| Dot size / pitch | 0.32 * 0.32 mm / 0.34 * 0.34 mm |
| Backlight | White LED, Vf 3.3 V typ., If 75 mA typ. |
| Brightness | 500 cd/m² standard; customizable up to 2000 cd/m² |
| Operating temperature | −40 to +70 °C |
| Storage temperature | −40 to +80 °C |
| Compliance | RoHS |
| Pin 1 — SDA | Serial data input / output |
| Pin 2 — VSS | Ground, 0 V |
| Pin 3 — SCL | Serial clock input |
| Pin 4 — RSTB | Reset, active low |
| Pin 5 — A0 | Data / command select |
| Pin 6 — CSB | Chip select, active low |
| Pin 7 — VDD | Logic supply, +3.3 V |
| Pin 8 — BLA | Backlight anode, +3.3 V |
| Pin 9 — BLK | Backlight cathode, 0 V |
Serial clock cycle 80 ns minimum, with 30 ns high / low pulse width. Reset pulse width 1 ms minimum. Logic supply 3.0–3.5 V (3.3 V typical).
The 160 * 160 dot matrix holds four or more channel rows plus a total line and bar indicators on one screen. The transflective panel remains readable when the enclosure cover is closed or the backlight is dimmed, and the −40 °C low-end covers outdoor metering cabinets in cold regions.
Square geometry allows a large numeric readout with a secondary bar scale or status row. The 6 o'clock viewing direction matches panel-mounted instruments operated from below, and the white LED backlight keeps the display readable in dim control rooms.
This is an FSTN monochrome LCD module, not a TFT. FSTN is a passive matrix super-twisted nematic panel: it shows black pixels on a pale background, needs no colour filter, and is chosen for static data, low power and long service life. TFT is an active matrix colour panel. If your interface expects RGB or MIPI video data, this module is not the right fit.
The standard model BXD160160E2G-FF64L-VA uses a 4-wire serial interface (SDA, SCL, A0, CSB) with 3.3 V logic, so any 3.3 V MCU with four GPIO lines can drive it. If your design already has an 8080 bus, the HYG160160E6G-FF64L-VA variant provides an 8-bit parallel interface with the same panel and controller.
The ST75161 contains 160 * 161 * 2 bit DDRAM. You write pixel data through the serial port; the controller scans the panel independently, so display refresh does not consume MCU time. Both 4-grey and monochrome modes are supported.
One piece is accepted for sample and prototype orders. Volume pricing is quoted against the quantity and configuration you need; samples can be shipped with the exact FPC and polarizer you plan to use in production.
Yes. FPC pin count, pitch, length and bending direction, polarizer type, backlight colour and brightness, bezel colour and mounting holes can all be adapted. Standard brightness is 500 cd/m²; customized versions can reach 2000 cd/m² for direct-sunlight or high-ambient cabinets. Send your mechanical drawing or a sample and we will confirm the tooling and MOQ for the customized version.
The module is RoHS compliant, and the factory operates under ISO 9001 and ISO 14001. Specification drawings, pin assignments and inspection reports are supplied with quotations on request.
Modules are covered by the warranty terms agreed in the order contract. If a unit fails within that period under normal use, send the failure description, batch code and photos; we will analyze and replace or credit per the agreed terms.
Sample orders are shipped from available stock subject to confirmation at order time; production orders are scheduled after drawing approval and are quoted with a lead time per quantity. Modules are packed in anti-static trays with dry pack, and carton marks can follow your requirement.
| BXD160160E2G-FF64L-VA | 160 * 160 FSTN, 4-wire serial, 9-pin FPC |
| HYG160160E6G-FF64L-VA | 160 * 160 FSTN, 8080 8-bit parallel, 20-pin interface |
| Custom | FPC, polarizer, backlight, bezel and screen content per drawing |