The BXD000035 is a 3.5-inch IPS TFT LCD display module featuring a 480*800 resolution, capacitive touch panel, and an integrated UART board with RS232 signal interface. Designed for industrial and embedded applications, it supports 90° or 270° screen rotation, full viewing angles, and Modbus RTU communication protocol.
Product description for reference only. For specific design requirements, please refer to the product specification sheet.
| Product Name | 3.5 Inch 480*800 Serial Screen RS232 Signal Interface LCD Display Module with Capacitive Touch Board and UART Board |
|---|---|
| Model | BXD000035 |
| Size | 3.5 Inch |
| Touch-Sensitive | Yes |
| Display Mode | IPS |
| Display Color | 16.7M |
| Resolution | 480 * 800 |
| Screen Rotation | Supports 90° or 270° rotation |
| Point Pitch | 0.0945 (H) * 0.0945 (V) mm |
| Perspective | All-round perspective |
| Display Type | Fully transparent, very dark |
| Screen Outer Dimensions | 60.16 * 96.30 * 15.10 mm |
| Visible Area (VA) | 45.96 * 76.20 mm |
| Dot Matrix Area (AA) | 45.36 * 75.60 mm |
| Drive IC | ST7701S |
| Brightness | 400 cd/m² |
| Contrast Ratio | 650:1 |
| Interface Type | RS232 |
| Working Voltage | 5V |
| Backlight Color & Type | White LED backlight |
| Backlight Circuit | 7 LEDs, 20 mA, 21 ± 0.3V |
| Life-Saving | 50,000 hours |
| Operating Temperature | -20 ~ +70 ℃ |
| Storage Temperature | -30 ~ +80 ℃ |
| Product Certification | RoHS / REACH |
| Quality System Certification | ISO9001, ISO13485, ISO14001, IATF16949 |
| Work Principle | Projected Capacitance |
|---|---|
| Translucent Rate | 85% |
| Haze Value | 3% |
| Hardness | 6H |
| Simultaneous Contacts | 5 points |
| Structure | G+G |
| Drive IC | FT5436DQQ |
| Interface | I2C |
| Supported Systems | Linux, Android |
| Product Certification | RoHS / REACH |
| Quality System Certification | ISO9001, ISO13485, ISO14001, IATF16949 |
RS232 / RS485 / TTL share the same principle.
Company regulations require each product to maintain a stock of 1,000–5,000 sheets. When inventory falls below 1,000, production is immediately initiated. When inventory exceeds 5,000, production is paused. Proper inventory quickly meets customer demand for samples and small-batch needs, providing strong support for customer R&D and repeated trial production. It also guarantees quality: more time is available for inspection and attention to production details compared to made-to-order production. If an issue arises after the product reaches the customer, it can be replaced from stock. Proper inventory also reduces costs—production orders during peak season and inventory production during off-season allow maximum use of manpower and capacity. Additionally, material costs are lower during off-season, reducing overall product cost.
Products are mainly discontinued when raw materials are discontinued. To prevent this, the company prepares materials in a single purchase covering a full year's demand. Such large orders are often sufficient for suppliers to restart production lines. Additionally, alternative solutions can be developed—products remain identical in structure and function to the original, requiring only minor software changes from customers. For example, the ILI9325C supplier stopped supplying four years ago, but due to the one-time annual material preparation order being large enough, the supplier has specialized in producing for us multiple times, and we still supply normally today. Similarly, when the 3.0-inch 240*400 panel was discontinued, we found a new supplier, re-developed the panel, and reformulated cooperation terms, making the product available again. Kodak attaches great importance to maintaining good cooperation with suppliers, and stable raw material resources are obtained through special channels to ensure products are not discontinued. In the LCD display module industry, long-term supply is difficult, but Kodak has never let a customer down. Once a customer chooses us, we will definitely supply the goods—starting from the beginning and ending with the end. Profit is not the only goal; Kodak's integrity and long-term cooperation based on mutual trust are what we strive for.
Customer orders are based on market demand, which we cannot control, so we have no right to require customers to order a specific amount. The company has no minimum order quantity restriction. Because our products always maintain a certain amount of inventory, there is no need to produce in small quantities, giving us the ability to support small orders. Small-quantity orders will have a higher unit price.
We love shopping at large supermarkets like Walmart rather than convenience stores because Walmart offers a wide range of product categories. Our product categories attract customers, make selection convenient, and provide a one-stop service.
Kodak will not go bankrupt. Kodak has many customers distributed across various industries. Although some industries fluctuate greatly, Kodak's orders are always stable. Most of Kodak's customers come from the medical and industrial equipment industries, which have strong vitality. Many customers in these industries have entered into supply agreements with us for more than ten years. Kodak maintains a 10-year cash reserve and strictly controls company scale. Only when cash flow can sustain the company for 10 years without orders will we consider expanding scale. Kodak has a strong strategic mindset, with a one-year work plan, 5-year development plan and goals, 10-year development plan and goals, and even 50-year development plan and goals.
Kodak is certified under the ISO9001:2008 quality system, and ISO principles are fully and effectively implemented in practical operation. Product quality starts from design, materials, production process, equipment, production management, and detection and control at every stage—strictly guarded to prevent the production and circulation of defective products to customers. Additionally, every product is available to over 100 customers and has been certified in actual applications by more than 100 customers, ensuring reliable quality. Automotive industry standards are applied to our products, with sufficient attention paid to high-temperature and vibration resistance, and special attention to the stability of late-stage product applications. Defects appearing on the production line are not frightening; the real concern is a defective product reaching consumers after sale—the cost of dealing with such defects is the highest, even with the broadest range. To prevent this, Kodak applies the strictest product inspection standards.
Product quality is divided into three levels: consumer grade, industrial grade, and automotive grade. Kodak's product quality is positioned at the automotive grade. As automotive-grade products, they require strong shock resistance, high-temperature resistance, and a very low after-sales rework rate—requiring 5 to even 10 years of problem-free operation. To achieve this, we must use the best materials, the strictest production management, and the most expensive production equipment. Therefore, costs are relatively high. If the customer's order quantity is large, or there is a stable partnership with a large cumulative order quantity, customers can request a relatively favorable price through negotiation.
| Item | 3.5'' Serial Port TFT Display |
|---|---|
| Type | TFT |
| Display Size | 3.5 inch |
| Supplier Type | Original Manufacturer |
| Place of Origin | China |
| Brand Name | BXDisplay |
| Backlight Type | LED |
| Resolution | 480 * 800 |
| Brightness | 400 cd/m² |
| Operating Temperature | -20 ~ 70 ℃ |
| Mounting Type | SMD / SMT |
| Screen Size | 3.5 inch |
| Communication Interface | RS-232 |
| Driver IC | ST7701S |
Shanghai Best Display Electronic Technology Co., Ltd. is a high-tech enterprise focusing on liquid crystal displays, touch screens, OLED displays, and new display technology and its surrounding materials. The company integrates research and development, design, processing and manufacturing, and sales.
The company's core team members have been deeply engaged in the optoelectronic display technology field for more than 20 years, with rich experience in design, research and development, technical expertise, and a strict quality control system. Related products have passed ROHS, ISO9000, and IATF16949 certification.
Main products include MONO LCD panels, MONO LCM (liquid crystal display modules), 0.85-inch to 15.1-inch TFT (full series of full-color liquid crystal displays), CTP & RTP (touch screens), HMI (with system touch screen display modules), serial screens, Android integrated machines, Linux industrial display touch machines, X86 industrial machines, and more. The company holds multiple related intellectual property rights and patented technologies and has won the reputation of many customers overseas.
Products are widely used in industrial control, instrumentation, fire monitoring, mobile payment, vehicle instrumentation, vehicle electrical appliances, household appliances, intelligent assembly, smart wearable devices, power meters, water meters, gas meters, intelligent reading, and many other fields. The company has close cooperation with many Fortune 500 customers worldwide.
We are based in Shanghai, China, established in 2019. We sell to Western Europe (25.00%), Eastern Asia (15.00%), North America (5.00%), Central America (3.00%), and the Middle East (2.00%). There are approximately 101–200 people in our office.
Always a pre-production sample before mass production; always final inspection before shipment.
LCD panels, MONO LCD, TFT LCD, Android displays, and embedded all-in-one displays.
Shanghai Best Display Electronic Technology Co., Ltd. is a high-tech enterprise focusing on liquid crystal displays, touch screens, OLED displays, and new display technology and its surrounding materials. The company integrates research and development, design, and manufacturing.
Accepted delivery terms: FOB, CFR, CIF. Accepted payment currencies: USD, EUR, CNY. Accepted payment types: T/T, PayPal. Languages spoken: English, Chinese, Spanish, Japanese, German, French.