Ankai Bus Rocker Switch

Dashboard rocker switch for Ankai buses and coaches, also widely used across other bus makes with the same panel cut-out. The switch is used for lights, wipers, fans, work lamps and other 24V cabin circuits. Snap in mounting means the failed switch is pushed out from behind the panel and the new one clicks into the original opening, so no drilling or rewiring of the panel is needed.

Product Highlights

• Standard panel cut-out - snap in fit for the original dashboard opening
• 24V rated contacts - sized for bus lighting, wiper and fan circuits
• On off rocker action - clear detent position, easy to operate with gloves
• Illuminated option - LED indicator shows the circuit is live at night
• Heat resistant housing - ABS body that holds shape in a hot dashboard in summer
• Spade terminal connection - plugs onto the original wiring terminals

Technical Specifications

When to Replace the Switch

• Circuit no longer switches, or only works when the rocker is held
• Rocker loose, broken or the side retaining clips snapped off
• Indicator lamp dead while the circuit still works
• Melted or discoloured housing from a loose terminal and heat build up

Installation Notes

1. Switch off the battery master and confirm the circuit is dead before starting.
2. Release the switch from behind the panel and pull it out with the wiring attached.
3. Note the terminal positions, then transfer the spade connectors to the new switch.
4. Press the switch into the cut-out until the clips click, then test the circuit on both positions.

Packing and Supply

Switches are packed in poly bags and export cartons, with neutral packing and mixed container loading available. Custom rocker markings, colours and terminal layouts can be produced to order.

Order Support

Send us a photo of the original switch with the terminal layout and the panel cut-out size, and we will confirm the matching version and price within one working day.