Zhongtong Bus Front Panel Trim

Front panel decorative trim for Zhongtong city buses and coaches. The trim covers the joint between the front fascia panels and the bumper area, closes the gap around the headlamp surround and protects the painted panel edge from stone chips and light contact. It is moulded to the original contour so the panel lines stay straight and the front end goes back to the factory look after a repair.

Product Highlights

• Original contour - follows the Zhongtong front fascia panel line
• Textured ABS shell - hides small scratches and will not chalk in strong sun
• Paintable surface - can be finished in body colour if required
• Screw and clip fixing - fits the original mounting points on the front panel
• Impact absorbing - flexes on light contact instead of cracking like a rigid part
• Light weight - adds no load to the front panel and is easy to handle during fitting

Technical Specifications

When to Replace the Trim

• Trim cracked, split or missing after a light front end contact
• Surface heavily scratched, faded or peeling after long sun exposure
• Clips broken so the trim rattles or lifts at speed
• Front fascia or headlamp surround repainted or replaced during body repair

Installation Notes

1. Clean the mounting area and check that the original clips and screw bosses are intact.
2. Test fit the trim before final tightening so the panel gaps stay even on both sides.
3. Fix the clips first, then tighten the screws in a cross pattern to avoid stressing the shell.
4. Wipe the surface clean and apply body colour paint only after the trim is fully seated.

Packing and Supply

Each trim is wrapped in protective film, corner protected and packed in an export carton to survive sea freight. Neutral packing and mixed container loading with other Zhongtong body parts are available.

Order Support

Send us a photo of the original trim and the bus model, and we will confirm the matching position, side and price within one working day.